Hifiverse

Plattenspieler - Audio Note TT-Three Reference

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Note TT-Three Reference
Bildquelle - (c) Audio Note

The TT-Three Reference is the top three-motor suspended turntable from Audio Note (UK) and the Reference version of the TT-Three. Audio Note sums up the design as high mass torque without the usual energy storage problems of a high-mass platter. High Gloss Black is the standard turntable finish. A streamlined TT-Three .5 Reference, known in-house as the Half Reference, sits in the same top tier.

Key specs that matter

Drive is by a rubber belt around the outside rim of the platter, pulled by three motors. A completely analogue control system in the separate power supply unit locks their speed together. The power supply fascia is available in anodised aluminium or black acrylic. Lexan is the platter material, and the platter is very light. Its arm board is cut for Audio Note's own 10-inch AN-1S tonearm.

Engineering and use context

In this design the mass sits in the motors, not in the platter. Audio Note describes Lexan as highly inert, with virtually no reflective properties and no resonance storage problems. When the high mass stored in the motors provides torque to the light, inert platter, the company says the energy is focused as rotation and nothing else.

A three-point suspension carries the sub-chassis. Its centre lies at the bearing, which is also the epicentre of the motors' inertia. According to Audio Note, this removes the most common problem of suspended turntables, a misalignment of motors and suspension that leaves the platter vacillating between the centre of the drive system and the centre of the suspension.

The sub-chassis has three arms. Mounted on the far right, in the standard position, is the tonearm. Both remaining arms hold mass balancing weights that are an exact equivalent of the combined arm and cartridge mass, so each suspension tower carries an equal load.

Pairing

The AN-1S tonearm is required. Arm boards for other manufacturers' tonearms are not offered. A phono stage matched to the chosen cartridge is required.

Alternatives

The Audio Note TT-Three uses the same three-motor drive and Lexan platter, with a master control unit and an arm board for the 9-inch /II tonearms.

Spezifikationen

  • Modellbezeichnung

    TT-Three Reference

  • Geschwindigkeit

    N/A

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten