Hifiverse

Plattenspieler - Audio Note TT-Three

Beschreibung, Bilder, technische Daten und Spezifikationen

Audio Note TT-Three
Bildquelle - (c) Audio Note

The TT-Three is a three-motor, suspended belt-drive turntable from Audio Note (UK). It shares its lineage with the Voyd Reference and sits above the two-motor TT-Two and the single-motor TT-One in the Audio Note turntable range. Audio Note describes the concept as high-mass torque without the energy storage problems of a high-mass platter. The turntable comes in Satin Black or Satin White as standard, with High Gloss Black or White at extra cost.

Key specs that matter

Three motors drive the platter through a rubber belt around its outside rim. Their speed is locked together by a digitally synthesised frequency from the master control unit, which sits in a separate power supply with an anodised aluminium or black acrylic fascia. Its platter is made from Lexan and is very light. The arm board is cut for Audio Note's own 9-inch /II tonearms. Plinth dimensions are 480 x 442 mm (W x D).

Engineering and use context

Audio Note places the mass in the motors rather than in the platter. According to the company, Lexan is highly inert, with virtually no reflective properties and no resonance storage problems. With the stored mass of the motors providing the torque for the light platter, Audio Note says the energy is focused as rotation.

Suspension is a three-point design centred at the bearing, which is also the epicentre of the motors' inertia. This alignment avoids the problem of a drive system and suspension with different centres, where the platter vacillates between them. Three arms extend from the sub-chassis. One carries the tonearm in the standard position on the far right, and each of the other two holds a mass balancing weight equal to the arm and cartridge mass, so every suspension tower is loaded equally.

Pairing

An Audio Note 9-inch /II tonearm is required, as no arm boards for other manufacturers' arms are offered. A phono stage matched to the chosen cartridge is required.

Alternatives

The Audio Note TT-Three Reference is the higher three-motor model, supplied with an arm board for the 10-inch AN-1S tonearm.

Spezifikationen

  • Modellbezeichnung

    TT-Three

  • Geschwindigkeit

    N/A

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link