Hifiverse

Plattenspieler - Pro-Ject PS01-Wave by Parov Stelar

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject PS01-Wave by Parov Stelar
Bildquelle - (c) Pro-Ject

The PS01-Wave is a limited-edition belt-drive turntable, a joint project of Pro-Ject Audio Systems and the Austrian musician Parov Stelar. It is based on the Pro-Ject Debut Carbon Esprit (DC) and carries an exclusive design printed in seven layers. Production was limited to 1,000 pieces worldwide, and Pro-Ject lists the model as sold out. An Ortofon 2M Red moving-magnet cartridge is pre-mounted.

Key specs that matter

Speeds are 33 and 45 rpm with manual speed change. The platter is 300 mm acrylic, and the main bearing is stainless steel. Wow and flutter is ±0.19% at 33 rpm and ±0.17% at 45 rpm, and speed drift is ±0.60% and ±0.70%. Signal-to-noise ratio is 68 dB. Its carbon tonearm has an effective length of 218.5 mm, an effective mass of 6.0 g, an overhang of 18.5 mm and a tracking force range of 10 - 30 mN. Standby power consumption is under 1 W. Dimensions are 415 x 118 x 320 mm (W x H x D) with the lid closed, and weight is 4.9 kg net.

Engineering and use context

Pro-Ject made the tonearm from carbon fibre for higher stiffness and lower resonances than metal tonearms. According to the company, this material is used extensively in high-end tonearms and had not been used at lower price levels because of cost. The heavy acrylic platter is non-resonant.

Drive follows the Debut belt-drive design, with a low-noise AC synchronous motor in a TPE (thermoplastic elastomer) motor suspension. The motor is powered by the DC power supply through a precision DC-driven AC generator of the Speed Box type, for speed stability without unwanted vibration. Under the plinth are TPE damping feet. Pro-Ject states that this decoupling allows up to 20% higher listening levels without distortion.

A 15 V DC/0.8 A power supply and a dust cover are included.

Pairing

A phono stage with an MM input is required, either built into the amplifier or as a separate unit.

Alternatives

The Debut Carbon Esprit (DC) is the standard Pro-Ject turntable on which the PS01-Wave is based, without the Parov Stelar artwork.

Spezifikationen

  • Modellbezeichnung

    PS01-Wave by Parov Stelar

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Magnetic cartridge 2M Red

  • Plattenteller

    300 mm acrylic

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    ±0.19 (33 rpm) / ±0.17 (45 rpm)

  • Signal-Rausch-Abstand (dB)

    68

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    415 x 118 x 320

  • Gewicht (kg)

    4.9

  • Offizieller Link