Hifiverse

Plattenspieler - Pro-Ject PS00-Frida by Parov Stelar

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject PS00-Frida by Parov Stelar
Bildquelle - (c) Pro-Ject

The PS00-Frida by Parov Stelar is a belt-drive turntable from Pro-Ject Audio Systems of Austria, developed together with the musician Parov Stelar. It was made as a strictly limited edition of 1000 pieces worldwide, with an exclusive design printed in seven layers, and is now sold out at Pro-Ject. An Ortofon 2M Red moving-magnet cartridge is supplied with it.

Key specs that matter

Speeds are 33 and 45 rpm with manual speed change. Wow and flutter is ±0.19% at 33 rpm and ±0.17% at 45 rpm, and speed drift is ±0.60% and ±0.70%. Signal-to-noise ratio is 68 dB. The 300 mm acrylic platter sits on a stainless steel main bearing. Effective arm length is 218.5 mm, effective arm mass is 6.0 g and overhang is 18.5 mm, with a tracking force range of 10 - 30 mN. Standby power consumption is below 1 W. Dimensions are 415 x 118 x 320 mm (W x H x D) with the lid closed, and net weight is 4.9 kg.

Engineering and use context

Drive is by belt from a low-noise synchronous AC motor, powered by a DC power supply. The motor is decoupled with TPE (thermoplastic elastomer). Pro-Ject describes the acrylic platter as heavy and non-resonant.

Its 8.6-inch tonearm is made from carbon fibre. The deck stands on damping feet made from TPE, and Pro-Ject states that they allow up to 20% higher listening levels without distortion. A 15 V DC / 0.8 A power supply and a dust cover are included.

Pairing

A phono stage with an MM input is required for the 2M Red. It can be built into the amplifier or be a separate unit.

Alternatives

The Essential II Demon by Parov Stelar is another Pro-Ject turntable from the collaboration with the same artist, with a particle board platter and an aluminium tonearm.

Spezifikationen

  • Modellbezeichnung

    PS00-Frida by Parov Stelar

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Magnetic cartridge 2M Red

  • Plattenteller

    300 mm acrylic

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    33%

  • Signal-Rausch-Abstand (dB)

    68

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    415 x 118 x 320

  • Gewicht (kg)

    4.9

  • Offizieller Link