Hifiverse

Plattenspieler - Luxman PD-171A

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman PD-171A
Bildquelle - (c) Luxman

The PD-171A is a belt-drive analogue player from Luxman of Japan, equipped with a universal tonearm as standard. It is one of two revisions of the PD-171, alongside the armless PD-171AL. Luxman pairs a newly developed, high output power supply circuit with an AC synchronous motor, and a hairline-finished aluminium upper surface sits on a wooden base cabinet. In the United States the PD-171A was priced at USD 6,495.

Key specs that matter

Speeds are 33 1/3 and 45 rpm, each adjustable independently over a 5% range. Wow and flutter is 0.04% or less (W.R.M.S.). The motor is a reaction and AC synchronous type. Its 300 mm platter is machined from aluminium plate, diamond-cut and weight-adjusted to 5 kg, with an inertia of about 0.7 t·cm2. Dimensions are 492 x 140 x 407 mm (W x H x D, height to the top face of the platter), or 195 mm high with the dust cover mounted. Power source is 230 V (50 Hz), and power consumption is 38 W.

Engineering and use context

A 32-bit microcomputer and a high precision clock generator control the motor drive. Luxman uses a wide drive belt to eliminate unnecessary vibration. The platter runs on a 16 mm stainless steel centre spindle with bearings at the base, and a brass thrust bearing with a PEEK (polyetheretherketone) ball race lubricated with molybdenum oil supports its weight.

All major parts are attached to a 15 mm aluminium plate, which hangs from the main chassis by Luxman's under-slung method. Motor and power supply transformer sit on floating mounts, and four large spring-and-rubber insulator feet are connected directly to the chassis. According to Luxman, the metal chassis and wooden exterior form a hybrid vibration damping structure.

On the arm side, the PD-171A has a static balance tonearm with a one-point cross suspension bearing and a universal type headshell. Both the PD-171A and PD-171AL have the tonearm base plate as an interchangeable, independent part, and optional bases allow SME, SAEC, FR and Ortofon tonearms. An LED-illuminated reflective stroboscope displays the rotational speed itself, and detachable high-intensity LED stylus lights are provided. Supplied with the player are a 4 mm acrylic dust cover on cam support hinges, a magnesium alloy headshell and a grounded 5-pin DIN-RCA cable of OFC copper.

Pairing

No cartridge is included. A cartridge and a phono stage with an MM or MC input are required. The supplied cable terminates in RCA plugs. For a third-party tonearm the matching version is the armless PD-171AL.

Alternatives

The PD-151 MARK II is Luxman's three-speed belt-drive player with a brushless DC motor under PID control and the LTA-309 tonearm.

Spezifikationen

  • Modellbezeichnung

    PD-171A

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    30cm machined aluminium plate

  • Motor

    AC

  • Gleichlaufschwankungen (%)

    0.04

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    492 x 140 x 407

  • Gewicht (kg)

    N/A

  • Offizieller Link