Hifiverse

Plattenspieler - Luxman PD-151 MARK II Black Edition CENTENNIAL

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman PD-151 MARK II Black Edition CENTENNIAL
Bildquelle - (c) Luxman

The PD-151 MARK II Black Edition CENTENNIAL is a belt-drive turntable from Luxman of Japan, issued as a 100th Anniversary Limited Edition of the PD-151 MARK II. Luxman announced it on 16 April 2025. It is supplied with the LTA-309 tonearm and without a cartridge.

Key specs that matter

Drive is by belt from a brushless DC motor. Speeds are 33 1/3, 45 and 78 rpm, each adjustable independently by ±6%. Wow and flutter is 0.04% or less (W.R.M.S.). The platter is machined aluminium with a diamond-cut finish and weighs 4.0 kg. Tonearm specifications are an effective length of 222.5 mm, an overhang of 18 mm, a tracking error angle of ±3° or less, a height adjustment range of 15 mm and anti-skating from 0 to 4 g. Cartridges from 4 to 10 g are accepted (17 to 23 g with headshell). Dimensions are 465 x 133 x 393 mm (W x H to the platter surface x D), weight is 15.8 kg, or 17.2 kg with the dust cover, and power consumption is 6 W.

Engineering and use context

Luxman's low-speed, high-torque DC motor runs from a sine wave/PWM power supply, and a proportional-integral-differential feedback loop monitors and maintains speed. A wide belt drives the outside flange of the platter. A speed deviation LED shows normal, slow or fast running for each speed.

Its platter has a moment of inertia of 0.219 t·cm2. It sits on a 16 mm hard stainless steel spindle with a PEEK thrust bearing and a brass radial bearing filled with organic molybdenum oil.

The LTA-309 is a static balance, S-shaped universal arm with a concealed knife-edge bearing based on SAEC technology. It sits on a machined aluminium arm base and takes an H4 bayonet mount headshell.

Heavy components hang beneath the 10 mm aluminium top panel in Luxman's damped underslung construction, with a box-shaped framework underneath. Motor and power transformer are mounted on damping rubber, and the insulator feet allow up to 5 mm of independent height adjustment. Power, motor and speed controls are on the front panel. A DIN-RCA phono cable with OFC wiring is installed, and a headshell, rubber mat, EP adaptor and counterweight are included.

Pairing

A cartridge within the arm's weight range and a phono stage with a matching MM or MC input are required. The DIN-RCA phono cable is upgradable.

Alternatives

The standard PD-151 MARK II is the regular-production version of this Luxman turntable.

Spezifikationen

  • Modellbezeichnung

    PD-151 MARK II Black Edition CENTENNIAL

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.04

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    465 × 133 × 393

  • Gewicht (kg)

    15.8

  • Offizieller Link

Weitere Komponenten