Hifiverse

Plattenspieler - Luxman PD-151 MARK II

Beschreibung, Bilder, technische Daten und Spezifikationen

Luxman PD-151 MARK II
Bildquelle - (c) Luxman

The PD-151 MARK II is a belt-drive analogue player from Luxman of Japan, supplied with a tonearm. It inherits the exterior design and operational layout of the earlier PD-151 and is newly equipped with LTA-309, Luxman's own static balance tonearm. The top panel layout is narrowed down to three elements - tonearm, drive motor and platter - and the controls sit on the front panel. US list price was USD 5,695, with parts and labour covered for three years.

Key specs that matter

Speeds are 33 1/3, 45 and 78 rpm, each with an independent ±6% adjustment range. Wow and flutter is 0.04% or less (W.R.M.S.). Its platter is machined aluminium with a diamond-cut surface and weighs 4.0 kg, with a moment of inertia of 0.219 t·cm2. LTA-309 is a static balanced, S-shaped universal arm with a concealed knife-edge bearing, an effective length of 222.5 mm, an overhang of 18 mm and a tracking error angle of ±3° or less. Applicable cartridge weight is 4 - 10 g, or 17 - 23 g including the headshell. Dimensions are 465 x 133 x 393 mm (W x H x D, height to the platter surface), and weight is 15.8 kg, or 17.2 kg with the dust cover.

Engineering and use context

A brushless DC motor is powered by Luxman's sine wave/PWM power supply, and a PID (Proportional-Integral-Differential) feedback control loop monitors and maintains speed. This motor drives the outside flange of the platter through a wide belt. Under the platter is a 16 mm hard stainless-steel spindle with bearings at the lower end - a PEEK-lubricated thrust bearing and a brass radial bearing filled with organic molybdenum oil. A speed deviation LED is solid green at normal speed, blinking green when slow and blinking blue when fast.

SAEC, a Japanese brand with over 40 years of experience, developed the knife-edge bearing technology of the arm, and the arm base is machined aluminium. Anti-skating is adjustable from 0 to 4 g, and arm height over a 15 mm range. Cartridges are mounted in an H4 bayonet headshell of machined aluminium. Heavy components hang from the underside of the 10 mm aluminium top panel by Luxman's damped underslung method, within a box-shaped chassis. Inside, the motor and power transformer are mounted on damping rubber, and the insulator feet give up to 5 mm of independent height adjustment. Included are a rubber mat and belt, an aluminium EP adapter, a counterweight, two platter mount handles, adjustment tools and a pre-installed DIN-RCA phono cable with OFC wiring.

Pairing

A phono stage with an MM or MC input is required. Luxman names its own LMC-5 as a matching cartridge. The 4 mm acrylic dust cover with cam/spring hinges is sold separately.

Alternatives

The PD-171A is Luxman's two-speed belt-drive player with an AC synchronous motor and a 5 kg platter.

Spezifikationen

  • Modellbezeichnung

    PD-151 MARK II

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.04

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    465 × 133 × 393

  • Gewicht (kg)

    15.8

  • Offizieller Link