The MTI100 Integrated Turntable from McIntosh Laboratory combines a belt-drive turntable, a vacuum tube preamplifier section, a shielded phono preamplifier and a Class D power amplifier in one chassis. Digital and Bluetooth inputs, a subwoofer output and a headphone jack are also built in, and speakers are added separately. It was announced in January 2019 at USD 6,500.
Key specs that matter
Power output is 50 W per channel into 8 ohms and 80 W into 4 ohms, 20 Hz - 20 kHz. Amplifier THD is 0.2% maximum from 250 mW to half rated power and 0.5% from half to full power. Dynamic headroom is 1.0 dB (8 ohms) and 1.3 dB (4 ohms), and damping factor is above 200 (8 ohms) and above 100 (4 ohms). Frequency response is 20 Hz - 20 kHz (+0/-0.7 dB). Signal-to-noise ratio is 75 dB for the MM input and 90 dB for high level. Playback speeds are 33 1/3 and 45 rpm, wow and flutter is 0.1%, and turntable signal-to-noise ratio is 35 - 40 dB. Its Sumiko Olympia MM cartridge gives 4 mV at 1 kHz into 47 kohms, with 12 Hz - 30 kHz, 30 dB separation, compliance of 12 x 10-6 cm/dyne and 2.0 g tracking force. Dimensions are 489 x 171.5 x 356 mm (W x H x D), and weight is 15.2 kg.
Engineering and use context
The platter is belt-driven by an industrial grade permanent magnet AC synchronous motor, and speed is changed manually on a two-speed pulley. McIntosh states that platter speed is synced to the frequency of the AC power line. Its 3.18 kg machined aluminium platter sits on an inverted hardened steel shaft and axial ball arrangement with a bronze bushing. A machined aluminium tonearm has a cardan bearing arrangement, with ball bearings for lateral and sapphire/tungsten for vertical motion, a concentric counterweight and anti-skate, and no user adjustments. The Olympia has an elliptical stylus on an aluminium cantilever.
Platter and tonearm are mounted on 9.5 mm glass, the same glass as in McIntosh amplifier front panels, which sits on a 6.35 mm metal plate. Two 12AX7 tubes are used in the main preamplifier section, and the phono preamplifier is housed in a custom shielding box. Connections are one unbalanced stereo input, one unbalanced output bridged to AMP IN, coaxial and optical digital inputs, a subwoofer output and speaker binding posts. Bluetooth 4.2 uses an external antenna, and the front headphone jack is powered by the High Drive headphone amplifier. Power, volume and input are set by two knobs or the supplied remote. No dust cover is included.
Pairing
Speakers of 4 or 8 ohms are required. McIntosh names the XR50 bookshelf and XR100 floorstanding speakers as partners. A powered subwoofer connects to the subwoofer output.
Alternatives
The MT10 Precision Turntable is a separate McIntosh turntable with a moving coil cartridge.