The MT2 Precision Turntable is a belt-drive turntable from McIntosh Laboratory, supplied with a tonearm, a pre-installed Sumiko Moonstone moving magnet cartridge and a clear contoured dust cover. A green glow comes from under the platter and from the outside edges of the plinth. The model is now retired, with limited availability.
Key specs that matter
Playback speeds are 33 1/3 and 45 rpm, with servo speed control and fine speed adjustment. A DC motor with stainless steel brushes is used. Its platter is dynamically balanced polyoxymethylene (POM), on a polished and tempered steel shaft in sintered bronze bushings. Wow and flutter is 0.15% - 0.25%, and signal-to-noise ratio is 35 - 40 dB. The tonearm has a dural-aluminium arm tube, sapphire and ceramic bearings and an eccentric counterweight, and VTA, anti-skate and azimuth are adjustable. Output is one unbalanced stereo pair. Overall it measures 452 x 127 x 432 mm (W x H x D), 152 mm high with the dust cover, and weighs 13.2 kg.
Engineering and use context
The outer platter is solid black POM and is over 25 mm thick. According to McIntosh, its mass resists and absorbs external vibrations and gives flywheel action for stable speed. Inside it sits a CNC-milled aluminium inner platter. An external voltage-stabilised power supply drives the DC motor, and the motor is decoupled from the chassis.
The plinth has a resonance-optimised, highly compressed wood base with a black lacquer finish, and the top and middle acrylic plates absorb vibrations. Damping materials are used in the arm tube. Its vertical bearings use two precision ceramic surfaces with damping fluid, and the horizontal bearing is a gimballed sapphire design.
Sumiko's Moonstone is an MM cartridge with an aluminium cantilever and a 0.3 x 0.7 mil elliptical diamond stylus. Output is 3.0 mV at 5 cm/s into a recommended load of 47 kohm. Frequency response is 12 Hz - 33 kHz, channel separation 30 dB at 1 kHz and channel difference 0.5 dB at 1 kHz. Compliance is 12 x 10-6 cm/dyne, recommended tracking force is 2.0 g and the cartridge weighs 6.5 g. Tonearm height varies with the cartridge installed.
Pairing
A phono stage with an MM input and a 47 kohm load is required. McIntosh phono preamplifiers, stereo preamplifiers, integrated amplifiers and home theatre processors with phono inputs are its listed partners.
Alternatives
The MT5 Precision Turntable is another McIntosh turntable supplied with a moving magnet phono cartridge and a dust cover.