Hifiverse

Plattenspieler - McIntosh MT10

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MT10
Bildquelle - (c) McIntosh

The MT10 Precision Turntable is a belt-drive turntable from McIntosh Laboratory, supplied with the MCC10 moving coil cartridge. McIntosh introduced it in 2008 at USD 11,500. Tracking force, anti-skate and cartridge position are preset at the factory, and the plinth carries the McIntosh illuminated glass front panel. It comes with a 3-year limited warranty.

Key specs that matter

Playback speeds are 33 1/3, 45 and 78 rpm. A DC brushless motor is used, with electronic speed control including a braking feature. Its platter is silicone acrylic on a magnetic suspended ceramic bearing. Signal-to-noise ratio is 41 - 44 dB, and wow and flutter is 0.10% - 0.15%. The tonearm has a dural-aluminium arm tube, sapphire and ceramic bearings and an eccentric counterweight, with VTA, anti-skate and azimuth adjustable. MCC10 specifications are 0.5 mV at 5 cm/s (low output MC), a recommended load of 400 - 500 ohms, 20 Hz - 50 kHz, channel separation above 30 dB at 1 kHz, channel difference below 0.3 dB at 1 kHz, compliance of 6 x 10-6 cm/dyne, 2.4 g tracking force and 11 g total mass. Output is one unbalanced stereo pair. Overall it measures 444.5 x 223.8 x 533.4 mm (W x H x D), and weight is 19 kg.

Engineering and use context

CNC-machined from silicone acrylic, the platter weighs 5.4 kg and is 64 mm thick. It rotates on a bearing that uses magnetic suspension together with a cushion of air. McIntosh specifies a Swiss-made DC brushless motor under servo control, with a regulated power supply. An optical sensor reads 1,595 micro stripes on a disk under the platter and returns speed information to the servo. The illuminated speed meter on the front panel indicates the true rotation speed.

The chassis is built from a stainless steel base plate, a thick aluminium plate and an acrylic plate with internal damping material. Its arm tube is dural-aluminium with damping material, gimballed in two sapphire bearings for horizontal motion. Both vertical bearings are precision ceramic surfaces with damping fluid. The MCC10 has an elliptical diamond stylus, an aluminium cantilever and a hand-polished ebony wood-tone body.

Fibre-optic light diffusers and LEDs illuminate the glass panel and the platter, and the stainless steel chassis has a mirror finish. An external 24 V, 625 mA power supply is used. Supplied accessories include a record clamp, a platter mat, a stylus force gauge, a bubble level, a protractor and full-synthetic bearing oil.

Pairing

A phono stage with an MC input and a 400 - 500 ohm load is required. The Power Control input switches the front panel illumination with a McIntosh system.

Alternatives

The MT5 Precision Turntable is a McIntosh turntable supplied with a moving magnet cartridge and a dust cover.

Spezifikationen

  • Modellbezeichnung

    MT10

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Silicon Acrylic

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.10 - 0.15

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    444.5 x 223.8 x 533.4

  • Gewicht (kg)

    19

  • Offizieller Link

Weitere Komponenten