The Model 35 is a belt-drive turntable from SME Limited of Steyning, England, supplied with the new Series Vi tonearm. SME presented it in London on 4 April 2025 together with the Model 8, as the successor to the Model 30. UK pricing is GBP 35,999 in black or silver anodised finishes and GBP 37,999 in midnight blue or gunmetal anodised, and the US prices for the same versions are USD 38,999 and USD 41,165.
Key specs that matter
Speeds are 33 1/3 and 45 rpm, with independent memory settings selected by a switched encoder. The deck measures 480 x 430 mm (W x D) and stands 220 mm high to the top of the clamp. It weighs 32 kg, the speed control unit 2 kg and the power unit 4.2 kg. Platter diameter is 330 mm and the spindle-to-arm distance is 215.35 mm. For the Series Vi arm SME specifies a pivot-to-stylus distance of 233.15 mm, an effective mass of 10 - 11 g, a cartridge balance range of 7 - 18 g, tracking force of 0 - 3 g, an offset angle of 23.635 degrees, an overhang of 17.80 mm and null points at 66.04 and 120.9 mm.
Engineering and use context
A three-tower layout inspired by the Model 60 carries the sub-chassis. Its suspension uses bands in the towers and controls movement both vertically and horizontally, and the sub-chassis damping system seals automatically when the sub-chassis is locked down. De-coupled feet with multipoint isolation sit under the main chassis. SME describes the main chassis, sub-chassis and platter as acoustically treated. On the platter top is a layer of iso-damp material, diamond turned and scrolled. The main bearing has hydraulic damping and is lubricated for life.
Drive comes from a custom bi-phase AC synchronous motor. In the speed control unit a dedicated DSP engine generates two independent sine waves that set frequency, phase relationship and amplitude, and these are tuned to the motor. A two-channel class AB bipolar output stage is relay coupled to the motor, and the power transformer sits in a separate power unit, as on the Model 60.
Behind the Vi name is an improved Series V. The arm tube is CNC machined in one piece from a high-density, high-rigidity non-metallic polymer resin, with a circular cross-section in place of the magnesium tube. SME quotes lower measured tonearm and pillar resonances. Internal wiring is 0.1 mm Crystal Cable Mono X-Tal, terminated in RCA phono outputs with a phono ground post.
Pairing
A phono stage with RCA inputs and a ground terminal is required. Cartridge choice is set by the balance range of the Series Vi.
Alternatives
The SME Model 60 is the turntable from which the Model 35 takes its three-tower design and electronic speed control.