Hifiverse

Plattenspieler - Sme Model 8

Beschreibung, Bilder, technische Daten und Spezifikationen

Sme Model 8
Bildquelle - (c) Sme

The Model 8 is an integrated turntable from SME of Britain, delivered with the SME 309 tonearm already mounted. It follows the Model 6 and borrows its drive system from the SME Model 60, using a plinth of the same polymer resin family that the company machines for its Series VI and VA arms.

Key specs that matter

The two speeds, 33.33 and 45 rpm, are selected electronically on an outboard controller. The UK price is GBP 10,000. It measures 435 mm wide, 320 mm deep and 150 mm high, and weighs 12.4 kg, with the off-board power supply adding 2.4 kg. The platter is a Delrin design weighing 1.85 kg. Output leaves through gold-plated WBT RCA sockets with an earth terminal at the rear. Buyers choose between black, white and midnight blue finishes with contrasting details.

Engineering and use context

SME machines the plinth on CNC equipment from a dense polymer resin selected for its ability to absorb resonance while keeping the footprint compact. According to SME, it is thicker than the plinth of the Model 6 and carries about 40 percent more mass. The platter has also been made thicker for stability. A new generation AC motor drive, developed from the one in the Model 60, is managed by an electronic speed control unit whose frequency can be adjusted in steps of roughly 0.0133 Hz, letting the owner set pitch very precisely. The main bearing and spindle are made to the tolerances SME applies across its high-end range. The 309 arm has a magnesium armtube and a detachable magnesium headshell that adds rigidity and allows azimuth adjustment, together with a tungsten balance weight and ball race bearings in all planes. Crystal Cable wiring is fitted inside the arm as standard. The phono and low voltage input sockets were redesigned for this model, and machined aluminium finishers sit on the adjustable feet used for levelling and isolation. The deck has no built-in phono stage, USB output or wireless link, and it is operated manually.

Pairing

The 309 accepts cartridges weighing up to 17 g, and the removable headshell makes it simple to keep a second cartridge ready. An external phono stage suited to the fitted MM or MC cartridge is needed, and a record weight is part of the standard operating arrangement.

Alternatives

The SME Model 12 MK2 is the heavier SME deck with an aluminium billet chassis and a suspended sub-chassis.

Spezifikationen

  • Modellbezeichnung

    Model 8

  • Geschwindigkeit

    N/A

  • Antrieb

    N/A

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten