Hifiverse

Plattenspieler - Sme Synergy MK2

Beschreibung, Bilder, technische Daten und Spezifikationen

Sme Synergy MK2
Bildquelle - (c) Sme

The Synergy MK2 is an integrated turntable from SME Limited of Steyning, England, with a built-in phono stage and a factory-matched moving coil cartridge. Four makers contribute to it - SME supplies the deck and its Series IV tonearm, Ortofon the Exclusive series MC Windfeld Ti cartridge, NAGRA a custom phono stage and Crystal Cable the mono-crystal silver signal wire. The whole unit is factory configured and needs minimal set-up. Over the first Synergy, the MK2 has a new drive system that SME credits with improved speed control, accuracy and stability.

Key specs that matter

Speeds are 33.33 and 45 rpm, each with an independent memory setting selected by a switched encoder. Fine pitch is adjustable in steps of ±0.01% of the selected speed. The turntable is 370 mm wide, 350 mm deep and 178 mm high to the top of the tonearm, and it weighs 19.59 kg. Platter diameter is 302.5 mm and the spindle-to-arm distance is 215.35 mm. Its speed control unit measures 170 x 305 x 68 mm and weighs 2.88 kg, while the power unit measures 190 x 243 x 83 mm at 4.04 kg. On the Series IV arm the pivot-to-stylus distance is 233.15 mm and effective mass is 10 - 11 g.

Engineering and use context

Both the chassis and the sub-chassis are CNC machined from aluminium billet. The sub-chassis houses the main bearing, platter and tonearm and is suspended on an isolation system for primary resonance control. Four adjustable feet are mechanically de-coupled from the main chassis by isolators. Its 19 mm spindle is high chrome tool steel, ground and super finished, running in individually fitted sintered bronze bearings inside a sealed housing. At over 4.6 kg, the aluminium alloy platter is extensionally damped and has an iso-damp top surface, diamond turned with a fine scroll. A record clamp working on the reflex principle gives the largest possible platter contact with warped records.

SME drives the platter with a custom bi-phase AC synchronous motor. Inside the speed control unit a dedicated DSP engine generates two independent sine waves that set frequency, phase relationship and amplitude, tuned to the motor, and a two-channel class AB bipolar output stage is relay coupled to it. That unit has a billet aluminium case. A separate mains power unit keeps the transformer away from it and from the audio signal cables. The Series IV is a one-piece pressure die-cast magnesium arm with Crystal Cable internal wiring.

Pairing

The deck has RCA line outputs from the NAGRA stage, and a line input on an amplifier or preamplifier is required. Power for the phono stage comes from a separate NAGRA power unit through a low-voltage input.

Alternatives

The SME Model 35 is a larger SME turntable with a three-tower suspension and the Series Vi tonearm.

Spezifikationen

  • Modellbezeichnung

    Synergy MK2

  • Geschwindigkeit

    33/45

  • Antrieb

    N/A

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    Series IV tonearm

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    370 x 350 x 178

  • Gewicht (kg)

    19.59

  • Offizieller Link