Reed 1H is the latest addition to the entry level tonearm series of Reed, the Lithuanian company of designer and owner Vidmantas Triukas. This is the longest of its three versions, with a pivot to spindle distance of 295.6 mm. The 1H is the first Reed arm with carbon fibre as the primary armwand material. Prices for the 1H start at USD 5,195, and the metal parts come in seashell white or black.
Key specs that matter
Mounting distance and pivot to spindle distance are both 295.6 mm. Overhang is 13.4 mm, and offset angle is 17.6 degrees. Effective mass with the carbon fibre armwand is approximately 18 g. Arm height adjusts from 28 to 48 mm. Azimuth and VTA are adjustable, and the headshell is replaceable. Signal output is either a 5-pin DIN connector or Finewire 37 cables.
Engineering and use context
According to Reed, the carbon fibre tube is damped with soft wood. Its acoustic properties are then considerably better than those of carbon fibre alone and comparable to a wooden armwand.
Its bearing system is cardanic. The vertical axis has thrust rotation bearings, and the horizontal axis is based on thrust pivot bearings, the same concept as in the Reed 3P. Reed states that this construction eliminates bearing wobble. Its anti-skating is magnetic, similar to the one used in the 3P.
Two shorter versions are offered. At 251.6 mm the arm has 15.4 mm overhang and 20.7 degrees offset with about 15 g effective mass, and at 223 mm it has 17 mm overhang and 22.9 degrees offset with about 12 g. On every version the mounting distance equals the pivot to spindle distance. The arm mounts on most turntables directly or with an adapter.
Pairing
An armboard cut for the 295.6 mm mounting distance is required. Platter and mat height must fall within the arm height range. The 5-pin DIN output accepts a separate tonearm cable to the phono stage.
Alternatives
The Reed 3P is a tonearm of the same length with a three-pivot bearing and a wooden armwand.