Hifiverse

Tonarme - Reed Reed 2B 9.5"

Beschreibung, Bilder, technische Daten und Spezifikationen

Reed Reed 2B 9.5"
Bildquelle - (c) Reed

The Reed 2B is a tonearm from Reed, a company of five people in the Kaunas district of Lithuania. Its owner and designer, Vidmantas Triukas, is a radio engineer who has worked in hi-fi since 1985. This version is the shortest of the three 2B lengths, with 223 mm between pivot and spindle. Reed lists three new operating possibilities for the 2B - heavier cartridges, full factory assembly and anti-skating that is set separately for the start and the end of a record. The European base price is EUR 3,580.70.

Key specs that matter

Mounting distance and pivot to spindle distance are both 223 mm. Overhang is 17 mm, and the offset angle is 22.9 degrees. Cartridges weighing up to 35 g can be used. Approximate effective mass depends on the armwand - 8 g with Teak (light or dark), 10 g with Wenge and 12 g with Macassar Ebony or Cocobolo. Two finishes are offered, Seashell White and Black. Longer versions have mounting distances of 251.6 mm and 295.6 mm.

Engineering and use context

Low-friction ceramic bearings are used in this tonearm, and Reed names them together with the 35 g cartridge limit. It comes fully assembled. Only mounting and the adjustment of VTA, VTF, azimuth and anti-skating are left to the installer.

Anti-skating force is set with two regulation handles, one for the beginning and one for the end of the record, and both can be adjusted at any time while a record is playing. Reed gives the reason with a short theory. Friction at the stylus produces a clockwise moment around the pivot that tends to drag the stylus towards the spindle, and a constant compensating force removes the side thrust only at a few positions on the record. In a test with a fully matte, smooth test record, a Reed 3P arm and a Phasemation PP-2000MC cartridge at 1.9 g tracking force, the company measured clearly different skating force near the edge, in the middle and near the label. According to Reed, the variety of new stylus shapes also causes different friction forces in the groove.

Reed chose wood for its armwands after tests of several arm tube materials and bearing setups. Reed also states that the cable used in its tonearms is made by Stereo-Lux Musikanlagen and has no soldering points.

Pairing

A turntable with an armboard cut for this mounting distance is required. A phono stage with an input for the chosen cartridge is required.

Alternatives

The Reed 1H is the entry-level Reed tonearm, with a carbon fibre armwand and a cardanic bearing system.

Spezifikationen

  • Modellbezeichnung

    Reed 2B 9.5"

  • Typ

    Unipivot

  • Effektive Masse (g)

    N/A

  • Effektive Länge (mm)

    N/A

  • Einstellbereich Kanalbalance (g)

    <35

  • Überhangwinkel (deg)

    22.9

  • Überhang (mm)

    17

  • Gewicht (g)

    N/A

  • Offizieller Link