Hifiverse

Tonarme - Reed Reed 2B 10,5"

Beschreibung, Bilder, technische Daten und Spezifikationen

Reed Reed 2B 10,5"
Bildquelle - (c) Reed

Reed 2B is a tonearm from Reed, the Lithuanian company that radio engineer Vidmantas Triukas founded near Kaunas in 2007. It is offered in three effective lengths, and this is the middle one, with a pivot to spindle distance of 251.6 mm. Reed introduced the 2B with three new operating features - heavier cartridges, full factory assembly and anti-skating set independently for the start and end of a record. The US base price is USD 5,595.

Key specs that matter

Mounting distance and pivot to spindle distance are both 251.6 mm. Overhang is 15.4 mm, and offset angle is 20.7 degrees. Low-friction ceramic bearings allow cartridges weighing up to 35 g. Effective mass depends on the wooden armwand - approximately 10 g in light or dark teak, 12 g in wenge and 14 g in Makassar ebony or cocobolo. Anti-skating has two regulation handles. Metal parts come in seashell white or black.

Engineering and use context

According to Reed, the 2B comes fully assembled. After mounting, only VTA, VTF, azimuth and anti-skating are set.

Both anti-skating handles can be adjusted at any time while a record is playing, one for the beginning and one for the end of the side. Reed links this to the variety of modern stylus shapes, which cause different friction forces between stylus and groove. Its explanation starts from the friction force F = μN, which acts tangentially to the groove. Offset from the line between pivot and stylus, this force creates a moment around the pivot that drags the stylus towards the spindle, and the moment varies with the radius of the stylus position. A constant compensating force removes the side thrust only at a few positions on the record.

Reed measured skating force on a fully matte and smooth test record with a 3P tonearm and a Phasemation PP-2000MC cartridge at 1.9 g tracking force. The differences between the beginning, middle and end of the record were clearly noticeable.

Two other lengths are offered. At 223 mm the overhang is 17 mm and the offset angle 22.9 degrees, and at 295.6 mm they are 13.4 mm and 17.6 degrees.

Pairing

An armboard drilled for the 251.6 mm mounting distance is required.

Alternatives

The Reed 2G is another pivoted tonearm in the Reed range with a cardanic bearing and a replaceable armwand.

Spezifikationen

  • Modellbezeichnung

    Reed 2B 10,5"

  • Typ

    Unipivot

  • Effektive Masse (g)

    N/A

  • Effektive Länge (mm)

    N/A

  • Einstellbereich Kanalbalance (g)

    <35

  • Überhangwinkel (deg)

    20.7

  • Überhang (mm)

    15.4

  • Gewicht (g)

    N/A

  • Offizieller Link