Hifiverse

Phonovorstufen - Einstein Audio Components THE PERFECT MATCH

Beschreibung, Bilder, technische Daten und Spezifikationen

Einstein Audio Components THE PERFECT MATCH
Bildquelle - (c) Einstein Audio Components

The Perfect Match is a two-box MC phono preamplifier with a current input from Einstein Audio Components, the Bochum company founded in 1988. Design is credited to Annette Heiss and engineering to Volker Bohlmeier. It appeared in late 2018 at EUR 2,800. Einstein describes it as a pure MC phono stage in an unbalanced version, with an amplifier unit and a separate external power supply.

Key specs that matter

Gain depends on the internal resistance (Ri) of the cartridge. At Ri = 12 ohms it is 74 dB in low gain and 79 dB in high gain, and for a 30 ohm cartridge the manual lists 65 dB and 71 dB. Signal-to-noise ratio is 75 dB or better (400 uV, 1 kHz, 12 ohms), and distortion is below 0.02%. Input impedance is a current input of virtual 0 ohms. Output impedance is 100 ohms, and maximum output voltage is 8 V. RIAA equalisation is active and two-stage. The phono unit measures 60 x 215 x 65 mm (H x W x D) and weighs 1.5 kg, and the power supply measures 60 x 140 x 215 mm and weighs 2 kg.

Engineering and use context

Impedance matching to the cartridge is automatic through the current input design. Two jumpers on the phono board select the gain - inserted for low gain, as delivered from the factory, and removed for high gain. Its amplifier section sits in a housing machined from a solid block of aluminium, and according to Einstein this housing counteracts interference and microphonic effects. Despite the dual mono configuration, signal paths are very short.

An external analogue power supply is housed in a solid enclosure for shielding, and its rear panel carries the mains inlet and the on/off switch. Mains fuses are 160 mA T for 230 V and 315 mA T for 115 V. On the phono unit a ground terminal takes the earth lead of the turntable or tonearm, and connections are RCA only. Surfaces are high-gloss stainless steel and acrylic. Supplied with the unit are the power supply, a connecting cable between the two boxes, a mains cable, two jumpers and cotton gloves. Warranty is three years.

Pairing

A low-impedance MC cartridge is required. Its output requires an unbalanced line input on a preamplifier or integrated amplifier. Einstein lists its The Pick Up cartridge, The Tonearm and The Record Player as matching products.

Alternatives

The Einstein The Phonostage is a larger pure MC phono stage weighing 5 kg, with 68 dB of gain switchable to 74 dB and an adjustable input impedance.

Spezifikationen

  • Modellbezeichnung

    THE PERFECT MATCH

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    100

  • Verstärkung (dB)

    74/79

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    <0.02

  • Abmessungen (mm)

    58 x 216 x 66

  • Gewicht (kg)

    1.5

  • Offizieller Link