The DP-570S is an MDS SA-CD player from Accuphase of Japan and the fifth generation of this line. Compared with the DP-570 of 2020 it has an improved SA-CD/CD drive and lower THD and noise. Its unit dimensions are unchanged, and the mass is slightly lower (19.0 kg for the DP-570). Digital inputs allow other sources to use its converter, and transport outputs allow the drive to work with an external DAC. List price in Europe is EUR 10,570.
Key specs that matter
Frequency response is 0.5 Hz - 50 kHz, and THD+N is 0.0006% (20 Hz - 20 kHz). Accuphase guarantees 121 dB S/N, 118 dB dynamic range and 117 dB channel separation. Guaranteed output noise is 2.2 µV against 2.5 µV for the DP-570 (12% lower), and actual THD+N at low frequencies is 30% lower. Output is 2.5 V at 50 ohms on both balanced XLR and line RCA, with output level adjustment in 1 dB steps. USB-B accepts PCM up to 384 kHz/32-bit and DSD up to 22.5 MHz via ASIO or 11.2 MHz via DoP. HS-LINK ver. 2 carries up to 384 kHz/32-bit PCM and 5.6 MHz DSD, coaxial up to 192 kHz/24-bit and optical up to 96 kHz/24-bit, each as input and output. Power consumption is 18 W. Maximum dimensions are 465 x 151 x 393 mm (W x H x D), and net mass is 18.4 kg.
Engineering and use context
D/A conversion uses the ESS ES9028PRO 32-bit HyperStream II Sabre DAC, the same chip as in the DP-770. Of its eight internal DACs, four are connected in parallel per channel under the MDS+ conversion system. The I-V converter has ANCC (Accuphase Noise and distortion Canceling Circuit), which detects noise and distortion components and injects a cancelling current of reversed polarity. After conversion the circuit is fully balanced, and in the Direct Balanced Filter each output has its own 5-pole Butterworth low-pass filter.
Its SA-CD/CD drive mechanism is a highly rigid unit mounted on a three-ply bottom plate for a low centre of gravity, and the laser pickup module sits on rubber vibration absorbers. Discs are rotated by an outer rotor brushless DC motor under a five-layer bridge cover. Each analogue and digital section has its own power transformer winding, followed by custom 15,000 µF filtering capacitors. Data discs with WAV, FLAC, DSF and DSDIFF files are playable, and the display shows sampling frequency and bit depth. Programmable playlists and a balanced output phase selector are included.
Pairing
A preamplifier or integrated amplifier with a balanced XLR or RCA line input is required. HS-LINK connects to other Accuphase components with that interface. The transport outputs and digital inputs allow an Accuphase voicing equalizer in the digital chain.
Alternatives
The DP-770 is another Accuphase SA-CD player built on the same ES9028PRO DAC chip.