Hifiverse

CD-/SACD-Player und Transporte - Accuphase DP-570

Beschreibung, Bilder, technische Daten und Spezifikationen

Accuphase DP-570
Bildquelle - (c) Accuphase

The DP-570 is an MDS SA-CD player from Accuphase of Japan, introduced in 2020 with a UK price of GBP 10,200. Accuphase calls it the fourth generation of the line that began with the DP-600 in 2008, and it replaces the DP-560 of 2016. It plays two-channel SA-CD and CD and accepts external sources through HS-LINK, USB, optical and coaxial inputs.

Key specs that matter

D/A conversion is 4MDS+ with an ESS ES9028PRO DAC chip. Frequency response is 0.5 Hz - 50 kHz (+0, -3 dB), THD+N is 0.0006% (20 Hz - 20 kHz), signal-to-noise ratio is 120 dB, dynamic range is 117 dB and channel separation is 117 dB. Balanced XLR and line RCA outputs each give 2.5 V at 50 ohms, with a digital level control from 0 to -80 dB in 1 dB steps. HS-LINK Ver. 1 accepts DSD 2.8 MHz and PCM up to 192 kHz/24-bit, Ver. 2 DSD 2.8/5.6 MHz and PCM up to 384 kHz/32-bit. USB accepts PCM up to 384 kHz/32-bit and DSD up to 11.2 MHz (ASIO only), coaxial up to 192 kHz/24-bit and optical up to 96 kHz/24-bit. Data discs may hold WAV, FLAC, DSF and DSDIFF files. Power consumption is 18 W, dimensions are 465 x 151 x 393 mm (W x H x D) and net weight is 19.0 kg.

Engineering and use context

ES9028PRO is the same DAC as in the DP-750 and has eight DACs inside. In the MDS+ circuit four of them run in parallel per channel, and Accuphase says this almost doubles performance for distortion, noise and linearity. A fully balanced structure follows the converter. Each output has its own 5-pole Butterworth low-pass filter, and in the Direct Balanced Filter the line and balanced circuits are independent of each other. An AK4118A interface chip reduces jitter. Its power supply uses analog circuits in a discrete configuration, the large transformer has separate analog and digital windings, and smoothing capacitors are customized.

The SA-CD/CD drive is mounted on a triple-layer bottom plate supported by high-carbon cast iron insulators. Four butyl elastic dampers connect the traverse and disc mechanisms, and a five-layer large bridge cover surrounds the traverse mechanism. Separate laser diodes of 655 nm and 790 nm read SA-CD and CD. Carved from an aluminium block and hard anodized, the tray uses steel bearing shafts.

With HS-LINK Ver. 2 the data and clock signals are transmitted separately, so master clock recovery is unnecessary at the receiver. HS-LINK, optical and coaxial transport outputs, programmable playlists, a balanced output phase selector and the RC-140 remote commander are also included.

Pairing

A preamplifier or integrated amplifier with XLR or RCA line inputs is required. An Accuphase voicing equalizer connects between the transport outputs and the digital inputs over HS-LINK.

Alternatives

The Accuphase DP-450 is a CD-only MDS player with an ES9026PRO-based 4MDS+ converter.

Spezifikationen

  • Modellbezeichnung

    DP-570

  • Transport

    k. A.

  • Player

    Ja

  • SACD-Unterstützung

    Ja

  • Wandlerchip

    ES9028PRO

  • Untere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Untere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Dynamikumfang (CD) (dB)

    N/A

  • Dynamikumfang (SACD) (dB)

    N/A

  • Signal-Rausch-Abstand (CD) (dB)

    N/A

  • Signal-Rausch-Abstand (SACD) (dB)

    N/A

  • Klirrfaktor + Rauschen (CD) (%)

    N/A

  • Klirrfaktor + Rauschen (SACD) (%)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten