The JBL Stage A100P is the 10-inch (250 mm) powered subwoofer of the JBL Stage series, designed and engineered at the JBL acoustic engineering facility in Northridge, California. It is the smaller of the two Stage subwoofers, below the 12-inch Stage A120P. Stage is a home stereo and home theatre loudspeaker system available in pantone black or two-tone wood, and the A100P is listed in Wood under item number JBLA100PWAM.
Key specs that matter
Its low-frequency driver is a long-excursion polycellulose woofer. Amplifier power is 150 W RMS (300 W dynamic). Frequency response is 35 Hz - 150 Hz. The crossover is variable from 50 Hz to 150 Hz at 24 dB/octave. Enclosure type is bass reflex via rear-firing tuned ports. There is one line-level LFE input. Dimensions are 335 x 380 x 340 mm (W x D x H), and weight is 13.63 kg.
Engineering and use context
On the rear panel are the Auto Power, Crossover, Level and Phase controls. Standby consumption is under 0.5 W. Maximum consumption is 205 W, drawing 1.6 A at 230 V or 3.15 A at 120 V. Two mains versions are made, 120 V, 60 Hz for the US and 220-230 V, 50/60 Hz for Europe.
Both Stage subwoofers share the same polycellulose cone material, control set and rear-ported bass reflex enclosure. Polycellulose is also the woofer cone material of the passive Stage models, which pair it with 1-inch (25 mm) aluminium dome tweeters in a new HDI waveguide.
Each A100P comes with a power cord, an owner's manual, a warranty card, a safety sheet and four floor spikes.
Pairing
An AV receiver, AV processor or stereo amplifier with a line-level subwoofer or LFE output is required. Speaker-level inputs are not provided. The matching Stage loudspeakers are the A190, A180 and A170 floorstanding models, the A130 and A120 bookshelf models and the A135C and A125C centre speakers.
Alternatives
The JBL Stage A120P is the larger Stage subwoofer, with a 12-inch (305 mm) polycellulose woofer and 250 W RMS (500 W dynamic).