Hifiverse

Subwoofer - JBL STAGE 220P

Beschreibung, Bilder, technische Daten und Spezifikationen

JBL STAGE 220P
Bildquelle - (c) JBL

The Stage 220P is a 12-inch powered subwoofer from JBL's Stage series, designed and engineered at the JBL Acoustic Engineering Center of Excellence in Northridge, California. With 500 W dynamic power it is the most powerful subwoofer in the Stage series. It is made for home theatre systems and stereo systems with a subwoofer output, and it comes in Espresso or Latte woodgrain finishes with solid colour front baffles and matching grilles.

Key specs that matter

The low frequency driver is a 12-inch (300 mm) polycellulose ribbed cone with high excursion. Amplifier power is 250 W RMS (500 W dynamic). Frequency response is 26 Hz - 150 Hz (±6 dB). Enclosure tuning is bass reflex via dual rear-firing tuned ports. There is one line-level LFE input. Dimensions are 416 x 405 x 444 mm (H x W x D), and weight is 18.7 kg, or 23.3 kg shipping.

Engineering and use context

Its woofer is a pure pulp cone with added materials for rigidity. The two rear-firing ports are flared, and JBL says this eliminates chuffing at the port exits. Behind a magnetically attached grille sits a floating front baffle with trim rings.

Controls are rear-mounted - Level, Crossover, Phase and Power. The crossover is a variable low-pass filter from 50 to 150 Hz with a 24 dB/octave slope. Its power control has an On setting and an Auto setting. The line-level LFE input bypasses the internal low-pass crossover when the sub is connected to the subwoofer output of a receiver.

Adjustable floor spikes screw into the plinth feet and can be adjusted from the top, for use on rugs or carpet. The box contains the subwoofer, a power cord, four floor spikes, the grille, a safety sheet and a quick-start guide.

Power requirements are 120 V, 60 Hz in the US version and 220-230 V, 50/60 Hz in the EU version. Standby consumption is under 0.5 W, and maximum consumption is 205 W (1.6 A at 230 V or 3.15 A at 120 V).

Pairing

An AV receiver, processor or stereo amplifier with a line-level subwoofer or LFE output is required. Speaker-level inputs are not provided.

Alternatives

The JBL Stage 200P is the smaller powered subwoofer of the same Stage series, with a 10-inch (250 mm) woofer and 150 W RMS (300 W dynamic).

Spezifikationen

  • Modellbezeichnung

    STAGE 220P

  • Untere Grenzfrequenz +/- 3dB (Hz)

    26

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    250

  • Größe (sm)

    41.6 x 40.5 x 44.4

  • Gewicht (kg)

    18.7

  • Offizieller Link

Weitere Komponenten