The Planar PL-2 is the larger of the two ultra-thin Planar subwoofers from REL Acoustics. Like the PL-1, it works in close relationship with the wall behind it, and REL designed it for large and medium rooms and open-plan spaces. The Planar range became available on 20 May 2026. List price is USD 3,299, or USD 3,798 with the wood grille upgrade.
Key specs that matter
The PL-2 has one front-firing active woofer and one rear-firing passive radiator. Its active driver is a 205 mm FlatPiston long-throw unit on a steel chassis, and the passive radiator is a 250 mm FibreAlloy cone on a steel chassis. Low-frequency extension is -6 dB at 24 Hz, in room. A 550 W RMS Pure Class D amplifier is used. Inputs are High Level Neutrik Speakon, Low Level RCA and LFE RCA. Mains input is 100-240 V, selectable. Dimensions are 650 x 480 x 144 mm (W x H x D), plus 39 mm for the wall bracket, and weight is 20.25 kg net or 28 kg shipping.
Engineering and use context
REL developed the FlatPiston driver exclusively for Planar, and the complete driver is barely 80 mm deep. Behind it, the long-stroke passive radiator faces the wall. REL uses boundary effect coupling, so the wall becomes part of the acoustic system and reinforces the low-frequency output. VIMAR, short for Vibration Isolation Material and Resonance Control, is integrated into the mounting brackets to reduce the transfer of unwanted energy into the wall.
On REL's test bench the amplifier delivers 600 W under demanding conditions. Filtering is all-analogue, using REL's PerfectFilter circuitry. The High Level and .1/LFE inputs can operate simultaneously in a combined music and theatre system. Protection is fully electronic, with set-safe, DC fault and output short protection, and the fuse is 4 A for 230 V or 8 A for 120 V operation.
Each PL-2 has an AirShip Direct wireless receiver in a concealed rear-panel compartment, pre-paired at the factory, and a 1.5 m Speakon cable for the transmitter is supplied. Edges are radiused, controls are recessed and cable management is concealed. Finishes are gloss piano black and gloss white lacquer. Wall brackets, a mounting template and hardware come in the box together with a cloth grille, a right-angle power cord and a control panel cover, and the Planar Cart is an option for free-standing use.
Pairing
A stereo amplifier connects through its loudspeaker outputs to the High Level Speakon input. An AV receiver or processor connects its LFE output to the LFE RCA input. Two PL-2 units are required for a stereo pair.
Alternatives
The REL Planar PL-1 is the smaller Planar model, with two 165 mm drivers and 300 W in a 522 mm wide cabinet.