Hifiverse

Subwoofer - REL Acoustics Planar PL-1

Beschreibung, Bilder, technische Daten und Spezifikationen

REL Acoustics Planar PL-1
Bildquelle - (c) REL Acoustics

The Planar PL-1 is the smaller of the two ultra-thin Planar subwoofers from REL Acoustics. It is designed to work in close relationship with the wall behind it, and REL lists it for smaller and medium-sized rooms, leaving larger spaces to the PL-2. The Planar range became available on 20 May 2026. List price is USD 2,499, or USD 2,898 with the wood grille upgrade.

Key specs that matter

The PL-1 has two front-firing active woofers and one rear-firing passive radiator. Its active drivers are two 165 mm long-throw FibreAlloy cones on steel chassis, and the passive radiator is a 250 mm FibreAlloy cone on a steel chassis with more than 45 mm of excursion. Low-frequency extension is -6 dB at 31 Hz, in room. A 300 W RMS Pure Class D amplifier is used. Inputs are High Level Neutrik Speakon, Low Level RCA and LFE RCA. Mains input is 100-240 V, selectable. Dimensions are 522 x 492 x 144 mm (W x H x D), plus 39 mm for the wall bracket, and weight is 18.9 kg net or 26 kg shipping.

Engineering and use context

Both long-throw drivers are derived from existing REL driver platforms. On the rear panel, the 250 mm passive radiator faces the wall, and REL uses boundary effect coupling to reinforce the low-frequency output. Its mounting brackets carry VIMAR, short for Vibration Isolation Material and Resonance Control, and according to REL this reduces the transfer of unwanted energy into the wall.

Input filtering is fully analogue. REL describes the 300 W rating as conservative. The protection system is fully electronic, with set-safe, DC fault and output short protection, and the fuse is 2.5 A for 230 V or 5 A for 120 V operation.

An AirShip Direct wireless receiver is built in. It sits in a concealed rear-panel compartment and is pre-paired with its transmitter at the factory, and a 1.5 m Speakon cable for that transmitter is supplied. Controls are recessed, cable management is concealed, and the finish is gloss piano black or gloss white lacquer. Instead of the wall, the PL-1 can stand on the optional Planar Cart, and an anti-fall restraint system is included for free-standing use. The box also holds a cloth grille, a right-angle power cord, a control panel cover, a wall mounting template, brackets and hardware.

Pairing

The High Level Speakon input connects to the loudspeaker outputs of a stereo amplifier. Its LFE input accepts the .1 channel of an AV receiver or processor. A line-level subwoofer output connects to the Low Level RCA input.

Alternatives

The REL Planar PL-2 is the larger Planar model, with one 205 mm FlatPiston driver, 550 W and -6 dB at 24 Hz in a 650 mm wide cabinet.

Spezifikationen

  • Modellbezeichnung

    Planar PL-1

  • Untere Grenzfrequenz +/- 3dB (Hz)

    31

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    300

  • Größe (sm)

    52.2 x 49.2 x 14.4

  • Gewicht (kg)

    18.9

  • Offizieller Link