The T/9x is the flagship of Serie T/x, the entry range of REL Acoustics below Serie S and the Reference Series. It replaced the T/9i and sits above the T/5x and T/7x. REL lists it at USD 1,699 and covers it with a 3-year parts and labour warranty.
Key specs that matter
This subwoofer combines a front-firing active driver with a down-firing passive radiator. Both are 250 mm long-throw FibreAlloy cones with an inverted alloy centre cap on a steel chassis. Low-frequency extension is -6 dB at 27 Hz. The amplifier is a 300 W RMS Class A/B design. Inputs are High Level Neutrik Speakon, one Low Level RCA and one LFE RCA, and there are no outputs. Mains voltage is 220-240 V, with 110-120 V versions for certain markets. Dimensions are 370 x 340 x 393 mm (W x H x D), and net weight is 20.6 kg (23 kg shipping, in a 506 x 460 x 465 mm carton).
Engineering and use context
For the x generation REL increased the cabinet volume. According to REL, the larger volume improves efficiency and gives higher output for no more amplifier power. Its corners have gently rounded radii. Less back pressure inside the cabinet allowed a stiffer driver suspension, and the suspension components were completely overhauled. The aluminium centre cap of the previous design was retained, and it stiffens the 250 mm cone while adding almost no mass.
Its 300 W MOSFET amplifier continues the Class A/B topology used in every generation of Serie T since 2006. Updates include new driver MOSFETs and new methods of securing the toroidal transformers. Protection is fully electronic, with set-safe, DC fault and output short protection. Fuses are 3.15 A semi-delay for 230 V and 6.3 A semi-delay for 115 V operation, and a standby mode switch is included only on 220 V units.
Finishes are piano black lacquer and gloss white lacquer in five coats, and a grey version is also offered. A mains lead and a nominal 10 m Neutrik Speakon cable are supplied. Wireless operation is possible with the optional REL Arrow system, sold separately, which uses no digital compression. REL states that the T/9x is not designed for vertical line array stacking.
Pairing
The High Level input connects to the loudspeaker outputs of the main amplifier and draws no power from it. An AV receiver connects its LFE output to the LFE RCA input. Two T/9x units are required for a stereo pair.
Alternatives
The REL T/7x is the smaller model of Serie T/x, with a 200 mm FibreAlloy active driver, a 250 mm passive radiator and a 200 W Class A/B amplifier.