Kube 8 MIE is the most compact model in KEF's Kube MIE subwoofer range, a 200 mm front-firing active design. The range of four sizes, with 200, 250, 300 and 380 mm drivers, was launched in February 2024, and this model had a US price of USD 599.99. KEF positions it for smaller rooms. It shares the amplifier of its larger siblings and has a Music Integrity Engine tuning of its own. The finish is black.
Key specs that matter
Design is a powered subwoofer in a sealed cabinet with one 200 mm drive unit. Frequency response is 34 Hz - 140 Hz (-6 dB), while the larger Kube models are specified at ±3 dB. Maximum output is 105 dB. Amplification is Class D, 300 W RMS. The variable low-pass filter covers 40 Hz - 140 Hz at 24 dB per octave, with an LFE position. Inputs are RCA phono sockets, speaker-level inputs and an expansion port for the KW1 wireless adapter. Power requirements are 100 - 240 V, 50/60 Hz, and consumption is 300 VA. Dimensions with rear panel and feet are 293 x 293 x 310 mm (H x W x D), and weight is 9.4 kg.
Engineering and use context
Its long-throw driver has a large cone area and high excursion, for higher output at lower frequencies. KEF designed the Class D amplifier for the driver and the available acoustic volume and states that it runs efficiently and cool.
Music Integrity Engine (MIE) is KEF's in-house suite of DSP algorithms, with lessons from the LS60 Wireless and KC62 applied to accuracy at high output. Within it, iBX Intelligent Bass Extension analyses the input signal, makes many small adjustments every second and allows the subwoofer to play louder at any listening level. Three room placement EQ presets cover cabinet, wall and corner positions. SmartConnect detects one or two RCA cables and adjusts gain, so no Y-adapter is required. Rear-panel controls are phase (0 or 180 degrees), crossover frequency, volume and mode. Auto wake-up returns the sub to standby after 20 minutes of inactivity, and always on and 12V trigger modes are also available.
Pairing
An AV receiver or preamplifier connects to the LFE/line input, and a stereo amplifier without a subwoofer output connects to the speaker-level input through the supplied Euroblock connector. With KEF W2 platform speakers, MODE is set to LFE and the high- and low-pass frequencies are set in the KEF app.
Alternatives
The KEF Kube 10 MIE uses a 250 mm driver in a 370 mm tall cabinet and reaches 24 Hz (±3 dB) with 111 dB maximum output.