Kube 10 MIE is a 250 mm front-firing active subwoofer and the mid-sized model of KEF's four-strong Kube MIE range, which covers 200, 250, 300 and 380 mm drivers. KEF introduced the range in February 2024, and the Kube 10 MIE had a US launch price of USD 799.99. Every Kube MIE has its own tuning of the Music Integrity Engine DSP, and the finish is black.
Key specs that matter
Design is a powered subwoofer in a sealed cabinet with one 250 mm drive unit. Frequency response is 24 Hz - 140 Hz (±3 dB), and maximum output is 111 dB. Amplification is Class D, 300 W RMS. The variable low-pass filter covers 40 Hz - 140 Hz at 24 dB per octave and has an LFE position for bass management in an AV receiver or processor. Inputs are RCA phono sockets, speaker-level inputs and an expansion port for the KW1 wireless adapter. Power requirements are 100 - 240 V, 50/60 Hz, and power consumption is 300 VA. Dimensions with rear panel and feet are 370 x 353 x 370 mm (H x W x D), and weight is 15.4 kg.
Engineering and use context
KEF uses a long-throw driver with a large cone area and high excursion for higher output at lower frequencies. Its Class D amplifier is designed for this driver and the available acoustic volume of the cabinet, and KEF states that it runs efficiently and cool.
Music Integrity Engine (MIE) is KEF's in-house suite of DSP algorithms, developed with experience from the LS60 Wireless and the KC62. It includes iBX Intelligent Bass Extension, which analyses the input signal and makes many small adjustments every second so the subwoofer can play louder at any listening level. KEF says the new iBX version lowers distortion further. An EQ selector offers three room placement presets - cabinet, wall and corner. SmartConnect detects whether one or two RCA cables are used and adjusts gain, and no Y-adapter is needed. Rear-panel controls include phase (0 or 180 degrees), crossover frequency and volume. Three power modes are available - auto wake-up with standby after 20 minutes of inactivity, always on and 12V trigger. There is no line output.
Pairing
An AV receiver or preamplifier connects to the LFE/line input, and a stereo amplifier without a subwoofer output connects to the speaker-level input through the supplied Euroblock connector. With KEF W2 platform speakers, MODE is set to LFE and the high- and low-pass frequencies are set in the KEF app.
Alternatives
The KEF Kube 12 MIE uses a 300 mm driver with the same 300 W RMS amplifier and reaches 22 Hz (±3 dB) with 114 dB maximum output.