Hifiverse

Subwoofer - KEF Kube 12 MIE

Beschreibung, Bilder, technische Daten und Spezifikationen

KEF Kube 12 MIE
Bildquelle - (c) KEF

Kube 12 MIE is the 300 mm model of KEF's Kube MIE subwoofer range and the second largest of its four sizes, placed between the Kube 10 MIE and the Kube 15 MIE. KEF launched the range in February 2024, and the US price of this model was USD 999.99. KEF positions it for larger rooms and dedicated home theatres. Its Music Integrity Engine tuning is specific to the driver and cabinet volume, and the finish is black.

Key specs that matter

Design is a front-firing powered subwoofer in a sealed cabinet, with one 300 mm drive unit. Frequency response is 22 Hz - 140 Hz (±3 dB), and maximum output is 114 dB. A 300 W RMS Class D amplifier is built in. The variable low-pass filter spans 40 Hz - 140 Hz at 24 dB per octave, plus an LFE setting. Connections are RCA phono sockets, speaker-level inputs and an expansion port for the KW1 wireless adapter. Power requirements are 100 - 240 V, 50/60 Hz, with 300 VA consumption. With rear panel and feet it measures 410 x 393 x 410 mm (H x W x D) and weighs 18.6 kg.

Engineering and use context

Inside is a long-throw driver with a large cone area and high excursion, specified by KEF for higher output at lower frequencies. The Class D amplifier is designed for the driver and the available acoustic volume, and KEF states that it runs efficiently and cool.

Music Integrity Engine (MIE) is a suite of DSP algorithms written in-house by KEF, drawing on the LS60 Wireless and KC62 development. Part of it is iBX Intelligent Bass Extension, which analyses the input signal with many small adjustments every second and allows higher output at any listening level, and KEF says its new version lowers distortion further. Three room placement EQ presets are provided, for a cabinet, a wall or a corner. SmartConnect recognises one or two RCA cables and adjusts gain, without a Y-adapter. Phase is switchable between 0 and 180 degrees, and crossover frequency and volume have their own controls. Power modes are auto wake-up, which enters standby after 20 minutes of inactivity, always on and 12V trigger. The Kube 12 MIE has no line output.

Pairing

An AV receiver or preamplifier connects to the LFE/line input with MODE set to LFE when bass management is done in the receiver. A stereo amplifier without a subwoofer output connects to the speaker-level input. With KEF W2 platform speakers, the crossover frequencies are set in the KEF app.

Alternatives

The KEF Kube 15 MIE uses a 380 mm driver with the same 300 W RMS amplifier, reaching 20 Hz (±3 dB) and 116 dB maximum output.

Spezifikationen

  • Modellbezeichnung

    Kube 12 MIE

  • Untere Grenzfrequenz +/- 3dB (Hz)

    22

  • Obere Grenzfrequenz +/- 3dB (Hz)

    140

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    300

  • Größe (sm)

    41.0 x 39.3 x 41.0

  • Gewicht (kg)

    18.6

  • Offizieller Link

Weitere Komponenten