Hifiverse

Standlautsprecher - YG Acoustics XV STUDIO 3

Beschreibung, Bilder, technische Daten und Spezifikationen

YG Acoustics XV STUDIO 3
Bildquelle - (c) YG Acoustics

The XV Studio 3 is a four-way passive floorstanding loudspeaker system from YG Acoustics, the American manufacturer with workshops in Colorado and Cambridge. A stereo pair consists of four towers, two main towers and two bass towers. It belongs to the Reference range, whose models are built from high-grade aerospace aluminium machined in-house and are hand-built by YG. The driver set combines the Lattice tweeter with seven BilletCore drivers and the third-generation Ultracoherent crossover.

Key specs that matter

Drivers are a 26 mm proprietary YG Lattice hybrid tweeter, dual 15 cm aluminium cone midrange drivers, triple 18.5 cm aluminium cone midbass drivers and dual 26 cm aluminium cone bass drivers. Crossover points are 90 Hz, 360 Hz and 1.85 kHz. Usable output extends from below 20 Hz to 40 kHz. Sensitivity is 88 dB, and impedance is 4 ohms average with a 3-ohm minimum. Main towers and bass towers each measure 129 x 33 x 63 cm (H x W x D). Unpacked weight is 145 kg per main tower and 135 kg per bass tower.

Engineering and use context

Each tower has a three-layer aerospace aluminium cabinet with constrained-layer damping. In the Lattice hybrid tweeter, the airframe is made of a specially selected aerospace alloy and machined by YG Acoustics, and YG quotes wide angular dispersion for it. Both the midrange and midbass drivers use proprietary YG aluminium cones with neodymium motor magnets. The bass drivers have ultra-high field strength motors.

YG specifies ±5° relative phase over the range where the relative output of the drivers is within 20 dB. Ultracoherent crossover components include custom capacitors with pure metal foil models, copper foil capacitors, foil resistors, resonance-damped inductors and OFC copper ribbon inductors. They sit on a custom anti-resonance PCB with a low dielectric constant and dissipation factor. Standard finishes are silver and black.

Pairing

An amplifier stable into loads below 4 ohms is required. Each channel uses one main tower and one bass tower.

Alternatives

YG Acoustics' XV 3 Signature is the other four-tower Reference model, with quad 26 cm bass drivers.

Spezifikationen

  • Modellbezeichnung

    XV STUDIO 3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    129 × 33 × 63

  • Gewicht (kg)

    145

  • Offizieller Link

Weitere Komponenten