The Vesper 3 is a three-way passive tower designed by YG Acoustics, the American company known for machined aluminium cabinets. According to the maker it is a completely new model rather than an update, inspired by the compact Carmel 3, and it aims at deeper bass and a wider dynamic range while keeping modest proportions. Development took roughly three years of research, modelling and optimisation.
Key specs that matter
In this design a 26 mm YG Lattice hybrid tweeter handles the top, an 18.5 cm aluminium cone midrange with neodymium magnets covers the middle, and a 22 cm aluminium cone bass unit with a motor of very high field strength works below 92 Hz. The quoted range runs from 30 Hz to 40 kHz, sensitivity is 88 dB, and impedance averages 4 ohm with a minimum of 2.8 ohm. Each cabinet stands 107 cm tall, 27 cm wide and 40 cm deep, and one speaker weighs 71 kg without packaging. Standard colours are black or silver, and YG can supply other colours on request.
Engineering and use context
YG calls its filter design Ultracoherent. The two crossover points sit at 92 Hz and 1.71 kHz, and the company states that relative phase between neighbouring drivers stays within 5 degrees across the band where their outputs are within 20 dB of each other. The aim is that the drivers combine as one source through the transition regions rather than interfering. The network uses custom capacitors and Litz wire inductors damped against resonance. Handing the bass unit only the lowest octaves leaves the midrange cone to cover almost four octaves up to the upper crossover, so the vocal band is not split between two drivers. The aluminium cones of the midrange and bass drivers are in line with the brand's practice of building both drivers and enclosures in-house. The tower is heavy for its size, and two people are needed to place it.
Pairing
Since the impedance falls well below nominal, the Vesper 3 suits solid-state amplifiers that stay stable and supply current comfortably into low impedances. With its moderate sensitivity, an amplifier of generous output is a better choice than a low-powered tube design. The long vertical profile works in rooms around 20 m2 and larger, where the deep bass can develop without the speakers dominating the space visually.
Alternatives
The YG Acoustics Carmel 3 is the smaller floorstanding speaker of the Reference Series that inspired the Vesper 3.