The Talus is a two-way passive floorstanding loudspeaker from YG Acoustics, the American company founded in 2002 with workshops in Colorado and Cambridge. It belongs to the Peaks series, which has five speaker models plus a powered subwoofer, and it is the most compact floorstanding model in that range.
Key specs that matter
Drivers are a 26 mm proprietary YG ForgeCore tweeter and an 18.5 cm proprietary YG aluminium cone midbass. Usable output extends from 32 Hz to 40 kHz. Sensitivity is 89 dB. Impedance is 7 ohms average and 3.7 ohms minimum. Each speaker measures 101.5 x 27 x 32.5 cm (H x W x D) and weighs 43 kg.
Engineering and use context
Both drivers are mounted in a thick aluminium front baffle, precision machined in-house by YG to a profile guided by computational modelling. Behind it, the sealed cabinet body is made of inch-thick dense resin fibre, curved to exact tolerances in custom presses. Bracing and acoustic absorbers inside are used against cabinet resonances and reflections.
YG specifies phase alignment of ±5° across an octave around each crossover point. Its crossover topology is optimised through simulation and listening tests, with A-P wirewound resistors, proprietary YG aluminium foil capacitors and custom inductors on computationally optimised layouts. Each crossover is hand-built on a circuit board machined in-house and mounted in an aluminium plinth that isolates it from microphonics. Finishes are Ebony, Rosewood and Oak.
Pairing
An amplifier stable into loads below 4 ohms is required. According to YG, the crossover design targets efficiency and the broadest possible amplifier compatibility.
Alternatives
YG Acoustics' Ascent is the three-way floorstanding model of the Peaks series, with a separate 22 cm bass driver.