Hifiverse

Standlautsprecher - Indiana Line Utah 8

Beschreibung, Bilder, technische Daten und Spezifikationen

Indiana Line Utah 8
Bildquelle - (c) Indiana Line

The Utah 8 is a large three-way floorstanding speaker made by the Italian company Indiana Line, designed from scratch with several engineering solutions the company had not used before, some of them proprietary. It has a retro-styled cabinet, a grille that attaches with magnets, and Indiana Line intends it for rooms larger than 25 m2.

Key specs that matter

A 28 mm aluminium-magnesium dome tweeter, a 7-inch midrange and a 12-inch woofer divide the band between them, crossing over at 350 Hz and 2.2 kHz. Frequency response runs from 30 Hz to 30 kHz, sensitivity is 93 dB at 2.8 V and 1 m, and Indiana Line recommends amplifiers of 30 to 240 W. The cabinet measures 700 mm high, or 732 mm on its feet, by 400 mm wide and 375 mm deep, and each speaker weighs 27 kg. The enclosure is MDF finished in PVC veneer.

Engineering and use context

A neodymium magnet, a copper shorting ring and both axial and radial venting chambers drive the tweeter dome, which sits in a 3D-Guide waveguide with an EQ-Ring phase corrector. The midrange uses a Curv woven polypropylene cone on a second-generation Dual-Wave surround and a cast aluminium basket, works in its own sub-enclosure, and is driven by an underhung voice coil (UHVC) with a large ferrite magnet. The woofer is the largest Indiana Line has ever fitted to a speaker. It combines a polypropylene cone, the new Tri-Wave suspension, twin ferrite magnets and a four-layer coil of copper wire, and the maker states that the suspension allows roughly double the excursion of a conventional design. In the crossover, air-core inductors and polypropylene capacitors are used, and LC-Trap filters remove cone resonances in the bass and dome resonances in the tweeter path. The Utah 8 is also the first Indiana Line speaker with DIRS (Damped Inner Reinforcement System), a multi-plane bracing lattice with rubber interfaces. Two bass-reflex ports fire downward from the base of the 66-litre box, which rests on four rubberised feet that keep the port outlets clear. The tuning frequency is 30 Hz, and supplied foam plugs close one or both ports, giving three operating modes.

Pairing

With high efficiency and an impedance curve that Indiana Line calls benign, the Utah 8 does not demand a powerful amplifier and works with modest integrated amps as well as larger designs. Its double set of terminals accepts separate cable runs for the bass and upper sections, or bi-amping with two stereo amps.

Alternatives

The Indiana Line Diva 6 offers a different floorstanding option from the company's Diva series.

Spezifikationen

  • Modellbezeichnung

    Utah 8

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    93

  • Impedanz (Ohms)

    4 - 8

  • Anforderungen an den Endverstärker (W)

    30 - 240

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    70.0 x 40.0 x 37.5

  • Gewicht (kg)

    27

  • Offizieller Link

Weitere Komponenten