Indiana Line of Italy builds the Lira 6 as a three-way design and the bigger of the two Lira floorstanding speakers, placed above the two-way Lira 5. The range also includes the Lira 2 and Lira 3 standmounts and the Lira 7 centre channel. Indiana Line developed it under a concept it calls Symbiotic Drive, in which drivers, crossover and enclosure are designed together. The pair costs EUR 2,300.
Key specs that matter
Two 175 mm long-throw woofers cover the bass, a 120 mm midrange works in its own sealed chamber and a 28 mm aluminium-magnesium dome tweeter handles the treble. Network transitions fall at 600 Hz and 3,000 Hz. Indiana Line rates the response at 35 Hz to 30,000 Hz and sensitivity at 90 dB at 1 W and 1 m, gives a 4 to 8 ohm impedance and recommends 30 to 200 W of amplifier power. Height is 933 mm on the feet and 900 mm without them, width is 276 mm across the feet against 220 mm for the cabinet alone, depth is 363 mm and the weight is 18 kg.
Engineering and use context
The tweeter dome is formed to a thickness of about 50 microns and driven by a neodymium motor with a copper shorting ring. It is mounted in a 3D Guide waveguide and fronted by a phase corrector Indiana Line calls EQ Ring. Indiana Line claims about 21 percent more radiating area than a standard tweeter of this class. The midrange pairs a Curv cone with a neodymium underhung voice coil and a Dual Wave surround, all carried on a cast aluminium basket. Both woofers combine Curv diaphragms with ferrite magnets, three shorting rings (two aluminium and one copper) and the second-generation Dual Wave suspension. Air-core coils and polypropylene capacitors make up the network, which also has gentle filter slopes and LC trap circuits that extend the working range of the woofers and tweeter. Its bass and mid-treble sections are physically separated, and the terminal plate of black anodised aluminium allows bi-wiring or bi-amping. The MDF cabinet has a 21 mm front baffle, non-parallel side walls, a trapezoidal profile and a slight backward tilt, with black bamboo bracing inside. A reflex port fires down toward the floor, and each cabinet stands on four rubber-damped feet rather than spikes. The matte lacquer is applied over a PE and PU base, and a magnetic fabric grille leaves a 10 mm gap to the cabinet edges.
Pairing
The moderate efficiency and a load that can drop to 4 ohm call for a solid-state integrated with plenty of current in reserve. With two stereo power amplifiers on hand, a listener can bi-amp the pair via the split terminals, one amplifier for the low section and one for the mid-treble section.
Alternatives
Within the Lira range, the Indiana Line Lira 5 offers a smaller two-way tower below this model.