Hifiverse

Standlautsprecher - Goldmund Theia Passive

Beschreibung, Bilder, technische Daten und Spezifikationen

Goldmund Theia Passive
Bildquelle - (c) Goldmund

Theia Passive is a four-way passive floorstanding speaker from Goldmund, the Geneva company that has developed audio equipment since 1978. Its design follows the Theia active wireless speaker, adapted for use with separate amplifiers. Goldmund launched it alongside the three-way Rhea Passive, at a price close to USD 215,000 per pair. Every unit comes in a dedicated flight case of 79 x 176 x 63 cm (W x H x D) with a gross weight of 264 kg.

Key specs that matter

Drivers are one soft dome tweeter, one 102 mm high medium, one 152 mm low medium and one 305 mm woofer. Frequency response is 20 Hz (-6 dB) - 25 kHz. Impedance is 6.0 ohms nominal, 3.6 ohms minimum. Each speaker measures 55 x 158 x 67.5 cm (W x H x D) and weighs 197 kg. Finish is a silver gray enclosure with black grids.

Engineering and use context

Cabinet panels are invisibly assembled, each part joined at a 45 degree angle, so that grid and aluminium cabinet form a single entity. Both side panels have a wavy profile. Vertical aluminium surfaces are micro-blasted, while horizontal panels are brushed. Under the cabinet, adjustable feet let the tip of Goldmund's Mechanical Grounding system make direct contact with the floor, and a rigid floor is required.

Goldmund's proprietary Proteus LS software was used to model the speaker, calculating system impedance, volume velocity, membrane displacement and sound pressure. Each driver has a fully custom independent crossover board with MKP capacitors and non-inductive film resistors that are thermally managed by custom-designed heat sinks. Its free air-core inductors are wound from ultra-thick pure copper and are held by a combination of PCB boards and mechanical mounting techniques to avoid vibration.

Three sets of connectors sit on the rear panel. In the first bi-amping option tweeter, high medium and low medium are bridged and a separate amplifier drives the woofer, and in the second the low medium and woofer are bridged while the tweeter and high medium have their own amplifier. With tri-amping the three sections are tweeter plus high medium, low medium, and woofer. Two pairs of bi-amping bridges are included, and Goldmund advises four people for unpacking.

Pairing

Goldmund requires high-speed amplifiers with high slew rate and high dynamic range. An amplifier stable into loads below 4 ohms is required. The terminals allow single amplification, bi-amping or tri-amping.

Alternatives

The Goldmund Rhea Passive is the three-way passive floorstanding speaker of the same range, with one medium driver above its woofer.

Spezifikationen

  • Modellbezeichnung

    Theia Passive

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    55 × 158 × 67.5

  • Gewicht (kg)

    197

  • Offizieller Link