Hifiverse

Standlautsprecher - Goldmund Rhea Passive

Beschreibung, Bilder, technische Daten und Spezifikationen

Goldmund Rhea Passive
Bildquelle - (c) Goldmund

Rhea Passive is a three-way stereo passive floorstanding speaker from Goldmund of Geneva, a company that has developed audio equipment since 1978. Its design language follows Goldmund's latest active speaker line, adapted for systems with separate amplification. Rhea Passive was introduced together with the four-way Theia Passive at about USD 108,000 per pair. Each unit is delivered in its own custom flight case, which measures 80 x 163 x 62 cm (W x H x D) and weighs 195 kg gross.

Key specs that matter

Driver complement is one soft dome tweeter, one 178 mm medium and one 305 mm woofer, with vent loading for the bass. Frequency response is 27 Hz (-6 dB) - 25 kHz. Impedance is 6.0 ohms nominal, 4.0 ohms minimum. Dimensions are 45 x 135 x 54 cm (W x H x D), and weight is 123 kg per unit. Standard finish is a gray enclosure with black grids, and a black enclosure with black grids is available on request.

Engineering and use context

Its exterior is made of ultra-thick aluminium, micro-blasted on vertical surfaces and brushed on horizontal ones, with wavy side panels. Each aluminium panel is joined at 45 degrees with invisible seams. Goldmund's proprietary Mechanical Grounding uses a central tip that channels vibration downward, and adjustable feet bring that tip into direct contact with the floor, so a rigid floor is required.

Goldmund modelled the system in its own Proteus LS software, which calculates impedance, volume velocity, membrane displacement and sound pressure. Every driver has a dedicated crossover board with MKP capacitors, non-inductive film resistors with integrated heat sinks and ultra-thick copper air-core inductors. A combination of PCB boards and mechanical mounting techniques holds these inductors against vibration. According to Goldmund, all passive components are rated for several times the power they actually carry, so voltage or current transients never cause saturation.

On the rear panel are three sets of connectors. Bi-amping has two options - tweeter and medium bridged with a separate amplifier for the woofer, or medium and woofer bridged with a separate amplifier for the tweeter. Tri-amping uses one amplifier per section. Speaker grids, two pairs of installed bridges and two pairs of bi-amping bridges are included, and Goldmund recommends four people for unpacking.

Pairing

Amplifiers with high slew rate and high dynamic range are required. An amplifier stable into 4 ohms is required. The terminals allow single amplification, bi-amping or tri-amping with stereo or mono amplifiers.

Alternatives

The Goldmund Theia Passive is the four-way passive floorstanding speaker of the same range, with separate high and low medium drivers above its woofer.

Spezifikationen

  • Modellbezeichnung

    Rhea Passive

  • Untere Grenzfrequenz +/- 3dB (Hz)

    27

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    45 × 135 × 54

  • Gewicht (kg)

    123

  • Offizieller Link