The Apologue by Pinel et Pinel x Kongo is a limited edition of Goldmund's Apologue active floorstanding loudspeaker, made with the Parisian leather and trunk house Pinel et Pinel and the French painter and graffiti artist Cyril Kongo. Production is limited to 20 pairs, distributed only by Pinel et Pinel and Goldmund, at EUR 1.5 million or USD 1.77 million per pair. Goldmund, founded in Geneva in 1978, first showed the Apologue in 1987. Its design came from the Italian artist Claudio Rotta Loria, and the New York Museum of Modern Art selected it that same year.
Key specs that matter
Each speaker has one dome super tweeter, one dome tweeter, two 178 mm midrange drivers and one 305 mm woofer. Operating ranges are 13 - 30 kHz (-6 dB) for the super tweeter, 2.4 - 13 kHz for the tweeter, 200 Hz - 2.4 kHz for the midrange and 24 Hz (-6 dB) - 225 Hz for the woofer. Built-in Telos amplification per speaker is 1 x 300 W for the super tweeter, 1 x 300 W for the tweeter, 2 x 300 W for the midrange and 2 x 700 W for the woofer, a total of 5200 W per pair. Inputs per speaker are one S/PDIF digital input and one wireless audio input. Mains voltage is 115 V or 230 V (+/-15%). Each speaker measures 85 x 185 x 120 cm (W x H x D) and weighs 360 kg.
Engineering and use context
This edition copies the exterior of the original 1987 Apologue, which was a three-way passive design, with 36 years of Goldmund development inside. Like the Apologue Anniversary, it is a six-way active speaker with six channels of built-in amplification. Goldmund DSP corrects the response in both amplitude and phase, and Leonardo is the company's time correction technology. The signal can be sent wirelessly, so the only cable at each speaker is an AC plug underneath.
Pinel et Pinel coated canvas covers the tops of the five units, and the other surfaces are in white calf leather, with one piece over the base and sides and another on the back. Kongo paints the flat leather pieces with spray paint and markers before assembly. Once dry, each piece is trimmed and hand-stitched with a saddle stitch, about 16 m of seams per speaker, so no two speakers are the same. The first pairs were made in pink and blue.
Pairing
A digital source with an S/PDIF output or a wireless audio link is required. No separate preamplifier or power amplifier is used.
Alternatives
The standard Goldmund Apologue is the same active speaker without the leather and artwork.