Hifiverse

Standlautsprecher - Raidho Acoustics TD3.8

Beschreibung, Bilder, technische Daten und Spezifikationen

Raidho Acoustics TD3.8
Bildquelle - (c) Raidho Acoustics

The TD3.8 is a three-way floorstanding loudspeaker in the TD Series of Raidho Acoustics, the Danish manufacturer that builds its drive units in-house in Pandrup. Raidho created it to bring much of the scale of the TD6 into a design for more manageable listening rooms, and its two new 8-inch bass drivers are related to those of the TD6. Its successor in the series is the TD3.10. Finishes are black piano and walnut burl veneer, or any colour to order.

Key specs that matter

Topology is three-way with bass reflex ports in the rear. Drive units are one Raidho TD Ribbon tweeter, two 5-inch (125 mm) Tantalum Diamond midrange units and two 8-inch (200 mm) Tantalum Diamond bass units. Crossover points are 400 Hz and 2.4 kHz with stepped slopes. Frequency response is 24 Hz - 50 kHz (±3 dB). Sensitivity is 89 dB (2.83 V/1 m), and nominal impedance is 6 ohms. Recommended amplifier power is 50 - 300 W. Dimensions are 440 x 1420 x 620 mm (W x H x D) including feet, with a 250 x 620 mm enclosure. Weight is 83 kg per speaker.

Engineering and use context

Each midrange and bass cone is a five-layer sandwich - an aluminium core, ceramic surfaces, tantalum and a final coating of artificial diamond. Every membrane carries about 1.5 carats of diamond in a layer 10 microns thick, applied in machines filled with argon gas. Raidho developed the material with the Danish Technological Institute and states that, compared with ceramic alone, resonances are 36 dB lower, the membrane is 50 times stiffer and breakup moves to 20 kHz.

In the motor an N52 neodymium magnet drives an underhung titanium voice coil wound from square-section wire. Magnet system and basket are shaped like a turbine, and solid copper plating on the inner pole piece lowers inductance.

Two 5-inch units flank the tweeter in an MTM configuration. According to Raidho, this arrangement reduces distortion, allows lower crossover points and controls dispersion. The planar magnetic ribbon tweeter received redesigned magnets, waveguide and rear panel for the TD Series, with 3 dB higher sensitivity and 35 dB lower distortion than before.

Located in the base of the cabinet, the crossover uses Mundorf components and is hardwired point to point by hand. Nordost cable connects every component, with Norse internal wiring as standard and TSC from the Odin range as an option.

Pairing

The terminals allow bi-wiring. Raidho asks for at least 100 W, with 300 W or more into 8 ohms recommended, and lists rooms of 30 - 100 m2.

Alternatives

The TD3.10 is the larger three-way floorstanding loudspeaker of the TD Series, with two 10-inch bass drivers and a response down to 20 Hz.

Spezifikationen

  • Modellbezeichnung

    TD3.8

  • Untere Grenzfrequenz +/- 3dB (Hz)

    24

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    50 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    44.0 x 142.0 x 62.0

  • Gewicht (kg)

    83

  • Offizieller Link