Hifiverse

Standlautsprecher - Raidho Acoustics X2t 25th Anniversary Edition

Beschreibung, Bilder, technische Daten und Spezifikationen

Raidho Acoustics X2t 25th Anniversary Edition
Bildquelle - (c) Raidho Acoustics

The X2t 25th Anniversary Edition is a limited 2.5-way bass-reflex floorstanding loudspeaker from Raidho Acoustics of Denmark, made to mark 25 years since the company was founded in 2000. Production is limited to 100 pairs worldwide, each pair numbered, with a serial plate, a commemorative badge and a certificate of authenticity signed by Raidho's executive team. It is based on the X2, which sold close to 500 pairs across all its versions. Available from September 2025, it costs EUR 21,000 per pair in Walnut Burl and EUR 23,000 in Emerald Green Burl or Midnight Blue Burl, all in high-gloss piano lacquer.

Key specs that matter

The driver complement is one Raidho planar-magnetic ribbon tweeter and two 133 mm Ceramix woofers with tantalum coating. Crossover points are 130 Hz and 3.4 kHz (second order). Frequency response is 40 Hz - 50 kHz (±3 dB), sensitivity is 87 dB (2.83 V/1 m) and nominal impedance is 4 ohms. Recommended amplifier power is 50 - 300 W. Each speaker measures 300 x 1,065 x 490 mm (W x H x D, incl. feet) and weighs 23 kg.

Engineering and use context

Raidho designs and builds its drive units by hand in-house. Its ribbon tweeter has no voice coil, and conductive tracks in the 11 µm foil make it a planar-magnetic design. The foil weighs 20 mg, about 50 times less than a conventional dome, and Raidho places its first breakup above 82 kHz. Each Ceramix woofer starts as an aluminium cone whose outer surfaces are converted into aluminium-oxide ceramic, giving a sandwich of aluminium core and ceramic skins. A tantalum coating raises cone stiffness and moves breakup modes up to 15 kHz. Neodymium magnets drive a titanium voice coil in an open motor structure.

Both woofers cover the bass, while one continues as the mid/bass unit up to the ribbon. An internal vented port exits in the rear baffle, and the bass tuning can be changed in steps. For this edition the crossover was upgraded - it is point-to-point and hard-wired by hand with Mundorf capacitors, inductors and resistors. Nordost Norse cable is used for the internal wiring, including inside the crossover, and the single-wire terminals are from Furutech.

Pairing

An amplifier stable into 4 ohms is required. Its single pair of Furutech terminals takes one speaker cable per speaker.

Alternatives

The Raidho X2t is the standard version of the same 2.5-way floorstanding loudspeaker, still available alongside the anniversary run.

Spezifikationen

  • Modellbezeichnung

    X2t 25th Anniversary Edition

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten