Hifiverse

Standlautsprecher - Raidho Acoustics X2.8

Beschreibung, Bilder, technische Daten und Spezifikationen

Raidho Acoustics X2.8
Bildquelle - (c) Raidho Acoustics

Raidho Acoustics added the X2.8, a three-way floorstanding loudspeaker, to its X Series. The Danish company is based in Pandrup under Dantax Radio A/S and marked its 25th year in 2025. CEO Morten Kim Nielsen calls the X2.8 a statement loudspeaker in the series. The model was announced in 2026 with availability from September 2026, and every pair is hand-built in Denmark. Pricing is EUR 27,000 per pair in black or white high gloss and EUR 30,000 per pair in walnut veneer.

Key specs that matter

Drive units are one Raidho planar-magnetic ribbon tweeter, one 133 mm midrange and two 203 mm bass drivers in a ported cabinet. Crossover points are 400 Hz and 2.7 kHz, with second-order and fourth-order filters. Frequency response is 26 Hz - 50 kHz (±1.5 dB). Sensitivity is 89 dB (2.83 V/1 m), and nominal impedance is 4 ohms. Recommended amplifier power is 50 - 300 W. Each speaker measures 227 x 1,320 x 450 mm (W x H x D) and weighs 45 kg. Connection is single-wire, and custom colours are available on request.

Engineering and use context

Every driver in the X2.8 is developed by Raidho and built in-house, and the midrange is an entirely new in-house design. According to Raidho, the moving mass of its ribbon tweeter is around 50 times lower than that of a conventional dome tweeter. Both bass drivers have aluminium/ceramic membranes.

Ceramix, the woofer technology of the X Series, starts with a thin aluminium cone. A liquid-plasma process at very high voltage converts its outer surface into aluminium-oxide ceramic, so thin rigid skins surround a softer aluminium core. Raidho states that this structure is stiffer than a pure ceramic cone and keeps its self-damping. In the X Series woofer, neodymium magnets sit in an open motor architecture that ventilates the driver and cools the titanium voice coil.

Inside the cabinet, the crossover is built by hand with Mundorf components, Nordost cable and point-to-point wiring. Like the other floorstanding models of the series, the X2.8 has an elongated wing profile with curved side panels and bass-reflex ports.

Pairing

An amplifier stable into 4 ohms is required, and Raidho recommends 200 W or more into 8 ohms.

Alternatives

The Raidho X2.6 is the smaller floorstanding model in the X Series, a 2.5-way design with two 165 mm Ceramix drivers and rear ports.

Spezifikationen

  • Modellbezeichnung

    X2.8

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link