Hifiverse

Standlautsprecher - Pylon Audio Opal 23

Beschreibung, Bilder, technische Daten und Spezifikationen

Pylon Audio Opal 23
Bildquelle - (c) Pylon Audio

The Opal 23 is a three-driver, two-way floorstanding loudspeaker from the first generation of the Pylon Audio Opal series. Pylon Audio is based in Jarocin, Poland, where it runs its own anechoic chamber and, besides its own models, builds loudspeaker cabinets for other European brands. The drivers of the Opal 23 are made in Pylon's own factory. A pair has been listed at EUR 900 including VAT, and the model has since been followed by the Opal 23 mkII.

Key specs that matter

Each speaker is equipped with two Pylon Audio PSW 18.8 CS woofers and one Pylon Audio PST T-50/8 25 mm silk dome tweeter. Frequency response is 38 Hz - 20 kHz. Efficiency is 89 dB and impedance is 4 ohms. Pylon rates power handling at 100 W nominal and 150 W maximum. Dimensions are 190 x 1,000 x 300 mm (W x H x D), and weight is 17 kg per speaker. Pylon gives a dedicated room size of 20 - 35 m2.

Engineering and use context

Both PSW 18.8 CS units are cellulose woofers with coated paper diaphragms, mounted in stamped-steel baskets. They sit above and below the tweeter in a midwoofer-tweeter-midwoofer configuration, and the compact size of the 25 mm dome allows closer acoustic centres. Pylon states that this symmetric layout allows listening from a short distance and also recommends the Opal 23 for a home recording studio. Loading is bass reflex.

Its cabinet is built from 18 mm MDF, the back panel included, with a thicker 22 mm front plate to reduce front wall vibration. Internal reinforcements are added at key points, chosen from measurements taken with a laser vibrometer in Pylon's anechoic chamber. A magnetic grille is included. Standard finishes are Black Ash, Walnut and Wenge, all in PVC veneer.

Pairing

An amplifier stable into 4 ohms is required. The Opal center, Opal sat and Opal sub complete the series as a home theatre set.

Alternatives

The Opal 23 mkII keeps the 190 x 1,000 x 300 mm cabinet but uses PSW 18.8 CP woofers and a PST 30.4-TGN graphene-reinforced textile dome, rated at 90 dB with the response extended to 30 kHz.

Spezifikationen

  • Modellbezeichnung

    Opal 23

  • Untere Grenzfrequenz +/- 3dB (Hz)

    38

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    100 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    19.0 × 100.0 × 30.0

  • Gewicht (kg)

    17

  • Offizieller Link