Hifiverse

Standlautsprecher - Pylon Audio Diamond 30 mkII

Beschreibung, Bilder, technische Daten und Spezifikationen

Pylon Audio Diamond 30 mkII
Bildquelle - (c) Pylon Audio

The Diamond 30 mkII is a three-way floorstanding loudspeaker in the Diamond series from Pylon Audio of Jarocin, Poland. Alongside it the series includes 2.5-way and two-way models, and for the second generation Pylon rethought every element of the first Diamond 30, from the drivers to the cabinet and crossover. Pylon employs about 50 specialists and makes key components such as electroacoustic driver elements and crossover coils in-house, while Seas and Scan-Speak supply drive units.

Key specs that matter

Drive units are two Pylon Audio PSW 18.8.CA/X woofers (custom Seas CA18RNX), a PSW 15.8.CA/P mid-range unit (custom Seas design) and a PST 19.TN tweeter (Scan-Speak D2010/852100). Frequency response is 30 Hz - 20 kHz. Impedance is 4 ohms, and efficiency is 90 dB. Power handling is 130 W nominal and 250 W maximum. Dimensions are 196 x 1,090 x 525 mm (W x H x D), and each speaker weighs 29 kg. Pylon gives a dedicated room size of 28 - 48 m2.

Engineering and use context

Both woofers come from the Prestige series by Seas. Their magnetic circuits are significantly larger than on the predecessor, the aluminium-copper voice coils are enlarged to 38 mm in diameter, and Pylon states that the design gives more piston-like operation. On the mid-range unit, a Seas design modified by Pylon's engineers, a phase plug replaces the dust cap and removes the space under it together with its resonances. All three drivers are made with Spider Ring technology.

Scan-Speak's tweeter has been updated with a more powerful neodymium magnet system and reduced voice coil mass, and it no longer uses ferrofluid. A new dual resonance chamber further reduces its primary resonance. Its front plate is black cellular rubber.

Compared with the first version, the front and back are angled more steeply to improve the time integration of the frequency bands. Cabinet walls are solid MDF panels braced internally with ribs and additional rings, damped with natural sheep's wool and a newly selected soundproofing material against standing waves. Testing used a laser vibrometer and Pylon's anechoic chamber. A redesigned anti-vibration plinth carries the cabinet.

Finishes include 11 shades of oil-waxed oak veneer, oak veneer in 25% gloss lacquer, American walnut veneer, white or black lacquer and individual RAL colours, and a magnetic grille is included.

Pairing

An amplifier stable into 4 ohm loads is required. Amplifier output should stay within the speaker's maximum power rating.

Alternatives

The Pylon Audio Diamond 28 mkII is the smaller floorstanding loudspeaker of the series, 1,038 mm tall, with 89 dB efficiency and a weight of 25 kg.

Spezifikationen

  • Modellbezeichnung

    Diamond 30 mkII

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    130 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    19.6 x 109.0 x 52.5

  • Gewicht (kg)

    29

  • Offizieller Link