Hifiverse

Standlautsprecher - Pylon Audio Diamond 25 mkII

Beschreibung, Bilder, technische Daten und Spezifikationen

Pylon Audio Diamond 25 mkII
Bildquelle - (c) Pylon Audio

The Diamond 25 mkII is a 2.5-way floorstanding loudspeaker in the Diamond series from Pylon Audio, a Polish company based in Jarocin. For the second generation Pylon rethought every element of the original Diamond 25, from the drivers to the cabinet and crossover. The series combines 19 mm textile dome tweeters from Scan-Speak with mid/bass drivers with lightweight cellulose cones from the Norwegian company Seas.

Key specs that matter

Drive units are a Pylon Audio PSW 15.8.CA woofer (Seas CA15RLY), a PSW 15.8.CA/P mid-range unit (custom Seas CA15RLY/P) and a PST 19.TN tweeter (Scan-Speak D2010/852100). Frequency response is 36 Hz - 20 kHz. Impedance is 4 ohms, and efficiency is 87 dB. Power handling is 100 W nominal and 200 W maximum. Dimensions are 165 x 980 x 410 mm (W x H x D), and each speaker weighs 19 kg. Pylon gives a dedicated room size of 15 - 30 m2.

Engineering and use context

On the upper Seas unit, redesigned by Pylon's engineers, a phase plug replaces the dust cap and removes the resonances of the volume under the cap. The lower unit is the proven driver of the first generation, with a long, lightweight aluminium-copper voice coil, and it reproduces the low end. Both are made with Spider Ring technology and now sit closer together on the baffle, so the sound source is less sensitive to listening height.

Scan-Speak's tweeter has been updated with a more powerful neodymium magnet system and reduced voice coil mass, and it no longer uses ferrofluid. A new dual resonance chamber further reduces its primary resonance, and Pylon also quotes reduced nonlinear distortion. Its front plate is black cellular rubber.

Compared with the first version, the front and back are angled more steeply to improve the time integration of the frequency bands, and the base is completely redesigned. Walls are solid MDF panels braced internally with ribs and additional rings. Inside, natural sheep's wool and a newly selected soundproofing material damp standing waves. Pylon tested the speaker with a laser vibrometer and in its own anechoic chamber.

Finishes include 11 shades of oil-waxed oak veneer, oak veneer in 25% gloss lacquer, American walnut veneer, white or black lacquer and individual RAL colours. A magnetic grille is included.

Pairing

An amplifier stable into 4 ohm loads is required. Amplifier output should stay within the speaker's maximum power rating.

Alternatives

The Pylon Audio Diamond 28 mkII is the larger floorstanding loudspeaker of the series, with Seas-based PSW 18.8.CA/X and PSW 18.8.CA/P drive units, 89 dB efficiency and a room size of 25 - 42 m2.

Spezifikationen

  • Modellbezeichnung

    Diamond 25 mkII

  • Untere Grenzfrequenz +/- 3dB (Hz)

    36

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    100 - 200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    16.5 × 98.0 × 41.0

  • Gewicht (kg)

    19

  • Offizieller Link