Hifiverse

Standlautsprecher - Lansche Audio No.7.2

Beschreibung, Bilder, technische Daten und Spezifikationen

Lansche Audio No.7.2
Bildquelle - (c) Lansche Audio

The No.7.2 MKII is a large passive floorstanding loudspeaker from Lansche Audio of Germany. In the P-series it is listed above the No.5.2 MKII and below the No.8.3 and No.9.2. Its four cone drivers are grouped symmetrically around the CORONA plasma tweeter, which Lansche develops in-house and also sells as a separate module rated at 98 dB (1 W/1 m) and 6.4 ohms (min. 5.6 ohms), in a 160 x 160 x 300 mm housing weighing 2 kg. Lansche states that it was designed to reproduce music without limitation to dynamic range or frequency response. The pair price stood at EUR 65,000 in 2026.

Key specs that matter

Design - 3-way bass reflex system. Drivers - one 8 mm CORONA plasma tweeter, two 160 mm coated papyrus midrange units and two 280 mm aluminium woofers. Crossover frequencies are 250 Hz and 2.5 kHz. Impedance is 4 ohms nominal (min. 3.0 ohms), with a sensitivity of 92 dB (1 W/1 m). Frequency range is 23 Hz - 150 kHz (±3 dB). Each speaker weighs 150 kg. Surfaces are finished in multi-layer piano lacquer, offered in white, black and veneer.

Engineering and use context

Lansche uses a consistent D'Appolito arrangement here, with the two long-throw bass drivers and the two midrange drivers placed symmetrically around the plasma tweeter. Above 2.5 kHz everything is radiated by the CORONA unit, and the papyrus pair covers the band down to 250 Hz.

Its tweeter has no inductive voice coil, no inhomogeneous magnetic field, no resonance-bound membrane, no mass-spring system and no non-linear suspension, and the ion field radiates as a virtually point source. Sound is not radiated by a membrane of fixed material but by the transmitting medium, the air itself. An 8 mm long arc between a small curved annulus and a high-voltage outer electrode forms the ion field. According to Lansche, the ionised gas cloud has five times less area than a fixed membrane and 100,000 times less weight. The company also states that there is no system-generated resonance over the whole range of 1.5 kHz - 150 kHz, and that group delay is low and constant across the frequency spectrum.

Pairing

An amplifier stable into 4 ohms is required. Within the P-series, this model and the No.9.2 carry the lower nominal impedance rating.

Alternatives

For an 8 ohm floorstanding speaker from the same P-series, the Lansche No.5.2 MKII uses a single 280 mm aluminium woofer and weighs 82 kg.

Spezifikationen

  • Modellbezeichnung

    No.7.2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    23

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150 000

  • Empfindlichkeit (dB at 1 W/1m)

    92

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    150.0

  • Offizieller Link

Weitere Komponenten