Hifiverse

Standlautsprecher - Lansche Audio No.5.2

Beschreibung, Bilder, technische Daten und Spezifikationen

Lansche Audio No.5.2
Bildquelle - (c) Lansche Audio

The No.5.2 MKII is a passive floorstanding loudspeaker from Lansche Audio of Germany, listed in the P-series between the No.3.2 MKII and the No.7.2 MKII. Co-founder Rüdiger Lansche is a trained electrical engineer and violinist who started in the telecommunications sector and has worked on loudspeaker systems for over 40 years. Like every Lansche model, it uses the company's proprietary CORONA plasma tweeter. Lansche describes the restrained styling as intended to suit any living space. A pair was listed at EUR 38,850.

Key specs that matter

Design - 3-way bass reflex system. Drivers - one 8 mm CORONA plasma tweeter, one 160 mm coated papyrus midrange and one 280 mm aluminium woofer. Crossover frequencies are 250 Hz and 2.5 kHz. Impedance is 8 ohms nominal (min. 5.2 ohms), and sensitivity is 90 dB (1 W/1 m). Frequency range is 25 Hz - 150 kHz (±3 dB). Weight is 82 kg per speaker. Piano lacquer finishes are offered in white, black and wood veneer.

Engineering and use context

On the CORONA unit there is no inductive voice coil, no inhomogeneous magnetic field, no membrane, no mass-spring system and no suspension. An 8 mm long arc is set up between a very small curved annulus in the middle of the combustion chamber and a high-voltage outer electrode placed outside that chamber. This arc forms an ionised gas cloud, or ion field, which Lansche states has five times less area and 100,000 times less weight than a fixed membrane. The music signal modulates the electric field strength, and all points within the volume of the ion field are accelerated in unison by its changes, with virtually point-source emission. Sold separately as a module, the tweeter is rated at 1.5 kHz - 150 kHz (±3 dB), 98 dB (1 W/1 m) and 6.4 ohms (min. 5.6 ohms), in a housing of 160 x 160 x 300 mm weighing 2 kg.

The coated papyrus midrange covers the band between 250 Hz and 2.5 kHz, and the aluminium woofer is reflex-loaded below 250 Hz. Its front wall slopes rearward, a measure Lansche uses to linearise the phase response.

Pairing

Lansche describes the No.5.2 MKII as uncritical in terms of amplifier choice. An amplifier rated into 8 ohms is required.

Alternatives

Within the same P-series, the Lansche No.7.2 MKII is the larger floorstanding model, with two 280 mm aluminium woofers, a 4 ohm rating and a weight of 150 kg.

Spezifikationen

  • Modellbezeichnung

    No.5.2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    82.0

  • Offizieller Link

Weitere Komponenten