The MB2S XBD is a passive twin-cabinet studio monitor from PMC, the British company founded in 1991 by Peter Thomas and Adrian Loader. PMC describes it as a development of the MB2S with increased LF performance. It is intended for music recording, mastering and post production in stereo or surround, and its users include Studio Hilversum in the Netherlands. Registration within 10 days of purchase extends the warranty to 20 years.
Key specs that matter
This is a three-way system with two 310 mm (12 in.) PMC Radial LF drivers, a 75 mm PMC fabric dome MF unit and a 27 mm PMC fabric soft dome HF unit. Crossover frequencies are 380 Hz and 3.8 kHz. Frequency response is 20 Hz - 25 kHz, sensitivity is 91 dB (1 W/1 m) and impedance is 4 ohms nominal. Peak SPL is 124 dB at 1 m. Recommended amplifier power is 250 - 900 W, given per section as 120 W for HF, 120 W for MF and 600 W for each of the two LF drivers. Input connectors are three pairs of 4 mm sockets. Effective ATL length is 2 x 3 m. Dimensions are 1740 x 380 x 535 mm (H x W x D), and weight is 88 kg.
Engineering and use context
Bass loading is PMC's Advanced Transmission Line (ATL), and each cabinet has its own line. The main cabinet is the MB2S with its single Radial driver, PMC 75 midrange dome and tweeter. Added to it, the XBD cabinet contains a second Radial driver and raises LF headroom by 3 dB below 380 Hz for larger rooms. In a surround configuration PMC states that this added headroom covers the .1 effects channel without further sub units. Both cabinets can be positioned vertically or side by side.
According to PMC, the Radial LF driver allows large controlled excursions and avoids the effects of power compression through cooling via its cast alloy exo-skeleton and rear vented magnet. Its passive crossovers are 32-element, 4th-order networks housed in external enclosures, and these enclosures can be mounted to the rear of the XBD cabinets. A film filter option gives an HF roll-off of 1.5 dB or 3 dB, or a flat response.
Pairing
A high-power amplifier stable into 4 ohms is required. Its terminals allow tri-wiring or tri-amping. The matching low-profile centre channel is the MB2S XBD-C, and the matching subwoofer is the XB2.
Alternatives
PMC's MB3 XBD-A is an active twin-cabinet system with a second cabinet for a 12-inch Radial bass driver.