Hifiverse

Standlautsprecher - PMC MB2 XBD-A SE

Beschreibung, Bilder, technische Daten und Spezifikationen

PMC MB2 XBD-A SE
Bildquelle - (c) PMC

The MB2 XBD-A SE is the active version of PMC's twin-cabinet MB2 XBD se. Its upper cabinet is the three-way MB2 se, and the second cabinet carries a 12-inch driver used only for bass. PMC's se range has its roots in the company's three-way reference monitors, the IB2, MB2 and BB5, and in their XBD versions used in professional studios. Within the active se line it sits below the BB5 XBD-A SE.

Key specs that matter

This is a three-way active ATL system with two cabinets per side. Drive units are 2 x PMC 12-inch (310 mm) Radial bass drivers, a PMC75 SE 3-inch (75 mm) soft-dome midrange and a PMC34 1.3-inch (34 mm) soft-dome tweeter. Crossover frequencies are 380 Hz and 3.8 kHz. Frequency response is 20 Hz - 25 kHz, and effective ATL length is 2 x 3 m. Amplifier power per channel is 900 W (LF), 150 W (MF) and 150 W (HF). Inputs are Neutrik NL8 and NL4 on the cabinet and balanced analogue XLR on the electronics. Each stack measures 1740 x 380 x 535 mm (H x W x D) and weighs 116 kg.

Engineering and use context

Amplification is not built into the cabinets. Each side uses stand-alone PMC electronics - a control1200 active crossover/power amplifier and a power2400 power amplifier dedicated to the bass drivers - and the two units take 6U of rack height, with 1U spacing recommended between them. PMC couples the amplifiers directly to the drive units, and the active crossovers carry in-room tuning controls. Every system is tuned in situ by PMC's factory-trained installation engineers.

In the ATL enclosure a highly braced cabinet is lined with acoustic materials that absorb all but the lowest frequencies, and this bass energy exits from a front-panel vent. Each Radial driver has a massive magnet assembly and an exo-skeleton, and it vents hot air through the back of the assembly, its exposed fins acting as a heat sink for the coil. PMC developed the 34 mm tweeter for the power handling of its active range and gave it an acoustic lens. A profiled dispersion flange machined from a solid aluminium billet surrounds the PMC75 midrange, and all drivers carry a Nextel coating.

Both cabinets can stand side by side, but PMC recommends mounting them as a freestanding tower. A pair of PL-5 plinths (35 mm plus 50 mm adjustable spikes) and cork rubber disks come with the system. Veneers are Grand Walnut, Amarone, Natural Oak and Jet Black.

Pairing

A source or preamplifier with balanced XLR outputs is required. Rack space of 7U per side is required for the electronics. The matching centre speaker is the MB2-A-C SE.

Alternatives

The BB5 XBD-A SE is PMC's larger active twin-cabinet model, with 2 x 15-inch (380 mm) Radial bass drivers.

Spezifikationen

  • Modellbezeichnung

    MB2 XBD-A SE

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    150 + 150 + 900

  • Größe (sm)

    174.0 × 38.0 × 53.5

  • Gewicht (kg)

    116

  • Offizieller Link

Weitere Komponenten