Hifiverse

Standlautsprecher - Sonus Faber LUMINA V

Beschreibung, Bilder, technische Daten und Spezifikationen

Sonus Faber LUMINA V
Bildquelle - (c) Sonus Faber

The Lumina V is the flagship three-way floorstanding loudspeaker of Sonus faber's Lumina collection, made in Italy. It was announced in 2021 at USD 2,999 per pair, and an Amator version with a wooden front was added to the range later.

Key specs that matter

This is a 3-way vented box design. A 29 mm DAD soft dome tweeter with a ferrite magnet, a 150 mm paper cone midrange and two 165 mm woofers with a sandwich diaphragm make up the driver complement. Crossover points are 260 Hz and 2.6 kHz. Frequency response is 38 Hz - 24 kHz, sensitivity is 89 dB SPL (2.83 V/1 m) and nominal impedance is 4 ohms. Sonus faber recommends 50 - 300 W of undistorted amplifier power. Each speaker measures 1,049 x 280 x 372.6 mm (H x W x D) and weighs 22.5 kg, with iron spikes as the decoupling system.

Engineering and use context

For the mid-high section Sonus faber uses a crossover network it calls Hybrid IFF - Paracross Topology. It combines Interactive Fusion Filtering with the Paracross layout, in which the reactive components (capacitors and inductors) are placed on the negative rail of the circuit. The company states that this reduces the back EMF of the drivers and lowers the sensitivity of the crossover to radio frequencies.

Inside the cabinet, the midrange and tweeter are loaded into a separate internal mid-high chamber with the lute shape that Sonus faber uses as a signature form. According to the maker, this chamber increases structural rigidity and reduces standing waves within the acoustic load volume.

Each woofer diaphragm is a sandwich of two outer layers of cellulose pulp and other natural fibres with a layer of syntactic foam between them. A reflex port sits in the base and faces downward toward the floor.

Its DAD (Damped Apex Dome) tweeter is visco-elastically decoupled from the baffle. The front baffle is multilayer wood with a veneer or lacquer, and the sides and top are hand-covered in black leather. Finishes are Piano Black lacquer, Wenge with maple inlays and Walnut with maple inlays, all with black leather.

Pairing

An amplifier stable into 4 ohms is required. Two pairs of nickel-plated terminals, split into Mid-Hi and Low, allow bi-wiring or bi-amping. The matching subwoofer range is the Sonus faber Gravis collection.

Alternatives

The Sonus faber Lumina III is the smaller three-way floorstanding speaker of the collection, with two 150 mm paper cone woofers and crossover points at 350 Hz and 3.5 kHz.

Spezifikationen

  • Modellbezeichnung

    Lumina V

  • Untere Grenzfrequenz +/- 3dB (Hz)

    38

  • Obere Grenzfrequenz +/- 3dB (Hz)

    24 000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    104.9 x 28.0 x 37.26

  • Gewicht (kg)

    22.5

  • Offizieller Link