Hifiverse

Standlautsprecher - Sonus Faber Sonetto V G2

Beschreibung, Bilder, technische Daten und Spezifikationen

Sonus Faber Sonetto V G2
Bildquelle - (c) Sonus Faber

Sonus faber of Arcugnano, Vicenza, makes the Sonetto V G2 as a three-way floorstanding loudspeaker of its second-generation Sonetto collection. It sits below the Sonetto VIII G2 and uses a slimmer cabinet with two smaller woofers. Its midrange section builds on the Suprema midrange technology, including the cork chamber and the Camelia diaphragm.

Key specs that matter

This is a 3-way system with a sealed cork enclosure for the midrange and a down-vented box for the woofers. Drive units are one 29 mm (1.1 in) DAD Arrow Point extended frequency tweeter, one 165 mm (6.5 in) Camelia midrange and two 165 mm (6.5 in) woofers. Crossover points are 280 Hz and 2500 Hz. Frequency response is 35 Hz - 40 kHz, and sensitivity is 89 dB SPL (2.83 V/1 m). Nominal impedance is 4 ohms, and recommended amplifier power is 50 - 320 W. Each speaker measures 1088 x 308 x 415 mm (H x W x D) and weighs 33.4 kg. Two cartons of 1190 x 420 x 530 mm hold one speaker each, for a packed weight of 75.2 kg per pair.

Engineering and use context

Inside, tweeter and midrange share a cork chamber tailored for internal volume. Copper shorting rings are used in the tweeter and midrange motors, and the woofers have an aluminium demodulation ring. Sonus faber's Silk Dome DAD (Damped Apex Dome) tweeter has a copper cup, which the company credits with a response extending beyond 30 kHz.

An organic basket carries the Camelia membrane, shaped after the camellia flower and left unpainted. Sonus faber states that its five cuts avoid the resonances of a typical circular diaphragm. An aluminium phase plug sits at the centre of the midrange for dispersion and coherence.

Each woofer has a sandwich cone held by a rubber surround with a floral pattern. Its asymmetric shape breaks up the circular modes of the driver. Sonus faber has redesigned the lute-shaped cabinet for control over internal resonances and set it on a concrete base for stability. A 45-degree wood veneer, previously used on Stradivari, Amati and the Homage series, is part of the design. Finishes are Walnut Wood, Wenge Wood and Black, each with leather and concrete.

Pairing

An amplifier stable into 4 ohms is required. Integrated amplifiers and separate power amplifiers within the recommended power range both match.

Alternatives

The Sonetto VIII G2 is the larger three-way floorstanding model of the collection, with two 200 mm woofers and a crossover point at 350 Hz.

Spezifikationen

  • Modellbezeichnung

    Sonetto V G2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    320

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    108.7 x 41.5 x 30.8

  • Gewicht (kg)

    33.5

  • Offizieller Link