Hifiverse

Standlautsprecher - Sonus Faber LUMINA III

Beschreibung, Bilder, technische Daten und Spezifikationen

Sonus Faber LUMINA III
Bildquelle - (c) Sonus Faber

The Lumina III is a three-way floorstanding loudspeaker in Sonus faber's Lumina collection, made in Italy. It was launched on 8 September 2020 at USD 2,199 per pair, or GBP 1,995 in the UK. In 2021 the larger Lumina V joined the collection as its flagship floorstanding model.

Key specs that matter

This is a 3-way vented box design. Its driver complement is a 29 mm DAD soft dome tweeter with a ferrite magnet, a 150 mm paper cone midrange and two 150 mm paper cone woofers. Crossover points are 350 Hz and 3.5 kHz. Frequency response is 40 Hz - 24 kHz, sensitivity is 89 dB SPL (2.83 V/1 m) and nominal impedance is 4 ohms. Sonus faber specifies 50 - 250 W of undistorted amplifier power. Each speaker measures 989 x 228 x 277 mm (H x W x D) and weighs 15.9 kg, and iron spikes are supplied as the decoupling system.

Engineering and use context

DAD stands for Damped Apex Dome. The tweeter is the same unit used in the Sonetto collection, with a 29 mm soft silk diaphragm hand-coated by Kurtmueller, and it is visco-elastically decoupled from the baffle. Its midrange stems from sister designs in the Sonetto range and has an air-dried diaphragm made of a proprietary blend of natural fibre and paper. Both woofers were designed from scratch specifically for the Lumina line and use paper pulp cones. Chrome rings surround each driver on the front baffle.

According to Sonus faber, the Para-cross crossover topology is optimised for amplitude and phase response. A reflex port is placed in the base of the cabinet in a down-firing position.

The front baffle is multilayer wood with a veneer or lacquer, and the sides and top of the cabinet are hand-covered in black leather. Three finishes are offered - Piano Black lacquer, Wenge with maple inlays and Walnut with maple inlays, each combined with black leather. On the rear panel, four binding posts are split into Mid-Hi and Low sections.

Pairing

An amplifier stable into 4 ohms is required. The split terminals allow bi-wiring or passive bi-amping. Sonus faber offers the Gravis I subwoofer as a companion for the Lumina collection.

Alternatives

The Sonus faber Lumina V is the larger three-way floorstanding speaker of the collection, with two 165 mm sandwich-diaphragm woofers and crossover points at 260 Hz and 2.6 kHz.

Spezifikationen

  • Modellbezeichnung

    LUMINA III

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    24 000

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    98.9 x 22.8 x 27.7

  • Gewicht (kg)

    15.9

  • Offizieller Link