Hifiverse

Standlautsprecher - Vivid Giya G3 Cu

Beschreibung, Bilder, technische Daten und Spezifikationen

Vivid Giya G3 Cu
Bildquelle - (c) Vivid

The Giya G3 Cu is the third model of Vivid Audio's Giya Cu range, a four-way, five-driver floorstanding loudspeaker below the G1 Spirit Cu and G2 Cu and above the G4 Cu. Vivid intends it for homes without a dedicated listening room or the space for the G2 and G1. Its enclosure has a volume of just over one quarter of that of the G1 Spirit Cu, and the speaker stands about 1.1 m tall.

Key specs that matter

High frequencies come from the D26, a 26 mm alloy/carbon diaphragm dome unit. Upper-mid is the D50Cu, a 50 mm alloy/carbon dome with copper cap, and lower-mid is the C125SCu, a 125 mm alloy cone unit with a 50 mm voice coil and copper cap. Two C135 bass units have 135 mm alloy cones, 76 mm voice coils and an underhung motor design. Crossover frequencies are 220 Hz, 880 Hz and 3.5 kHz. Sensitivity is 87 dB (2.83 Vrms, 1 m, on axis), and impedance is 6 ohms nominal, 4 ohms minimum, with low reactance. Frequency range is 33 Hz - 36 kHz (-6 dB points), and frequency response is 36 Hz - 33 kHz (±2 dB on reference). Harmonic distortion (2nd and 3rd) stays below 0.5% under 220 Hz, below 0.1% between 220 Hz and 3.5 kHz and below 0.3% above 3.5 kHz. Power handling is 800 W rms (music program). The G3 Cu measures 1161 x 341 x 578 mm (H x W x D) and weighs 42 kg with the internal crossover or 37 kg with the external crossover.

Engineering and use context

Its D26, D50Cu and C125SCu are the same high and mid frequency drivers as in the larger Giya models, each with Tapered Tube loading. Vivid states that the C135 retains the motor structure and suspension profiles of the bass units of the larger siblings. Both C135 drivers sit in a reaction-cancelling mount that eliminates enclosure vibration. Bass loading is a reflex enclosure with an exponentially tapered tube, and its top ends in the curl of the tapered tube absorber, which eliminates top-to-bottom resonances. First break-up of the D26 is at 44 kHz.

Copper caps on the magnet systems of both midrange drivers reduce distortion. The cabinet is a glass-reinforced, balsa-cored sandwich composite with a carbon fibre base. Piano Black, Lexus Pearl White and Oyster Matte are the catalogue colours, and other colours are available by special order.

All Giya Cu models can be ordered with an external crossover in a piano-gloss case with two pairs of input terminals, linked to the speaker by an eight-way cable and a metal-cased NL8 connector.

Pairing

An amplifier stable into 4 ohms is required. The external crossover allows bi-wiring or bi-amping. Active operation uses four amplifiers, a signal-level active crossover and the Giya break out unit.

Alternatives

The Giya G4 Cu is the smallest model of the range, 1011 mm tall with two 125 mm C125L bass drivers.

Spezifikationen

  • Modellbezeichnung

    Giya G3 Cu

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten