Hifiverse

Standlautsprecher - Vivid Giya G1S Cu

Beschreibung, Bilder, technische Daten und Spezifikationen

Vivid Giya G1S Cu
Bildquelle - (c) Vivid

The Giya G1S Cu, which Vivid Audio of Durban, South Africa, also calls the Giya G1 Spirit Cu, is the largest of the four floorstanding loudspeakers in the Giya Cu series, above the G2 Cu, G3 Cu and G4 Cu. This series was first presented in Singapore on 10 October 2025. Its predecessor, the G1 Spirit, had already carried lessons from the G2 into the original G1, including a very large magnet system for the low frequency range. With the Cu version, the copper-clad magnet systems introduced in the flagship Moya M1 come to the Giya range. Pricing is EUR 95,000, against EUR 55,000 for the G2 Cu.

Key specs that matter

This is a 4-way, 5-driver system. A D26 26 mm alloy/carbon dome is the HF unit, and the upper midrange is a D50Cu 50 mm alloy/carbon dome with a copper cap. Both use Tapered Tube loading, as does the C125-75SCu lower-mid unit, a 125 mm alloy/carbon diaphragm (equivalent to a 165 mm driver) with a 75 mm voice coil and copper cap. Bass comes from 2 x C225-100 units, 225 mm alloy diaphragms (equivalent to 292 mm drivers) with 100 mm voice coils in a 45 mm gap. Sensitivity is 92 dB (2.83 V/1 m, on axis), and impedance is 6 ohms nominal, 3 ohms minimum at 20 kHz with no phase shift at that minimum. Vivid quotes 25 Hz - 36 kHz at the -6 dB points and 29 Hz - 33 kHz (±2 dB). Crossover points are 220 Hz, 880 Hz and 3.5 kHz, and power handling is 1,600 W rms (music program). Size is 1600 x 440 x 820 mm (H x W x D), and weight is 67.4 kg with the internal crossover or 62 kg with the external one.

Engineering and use context

In the C125-75SCu the 75 mm coil works in a radially polarised magnet system, and the D50Cu has a focused-flux 50 mm radial magnet system. Vivid states that the copper caps lower inductance, extend the high frequencies and lower distortion, in some cases by 20 dB. Second and third harmonic distortion is under 0.3% below 220 Hz, under 0.1% from 220 Hz to 3.5 kHz and under 0.3% above 3.5 kHz. First break-up of the D26 is at 44 kHz.

Its patented reaction-cancelling bass drivers use bass reflex loading with an exponentially tapered tube. The cabinet is a glass reinforced, balsa-cored sandwich composite in Piano Black, Lexus Pearl White or Oyster Matte, with bespoke colours on request.

Pairing

An amplifier stable into 3 ohms is required. An external crossover in a piano gloss case has two pairs of input terminals for bi-wiring or bi-amping and links to the speaker by an eight-way cable with a metal-cased NL8 connector. The Giya Break Out Unit allows active operation with four amplifiers and a signal-level active crossover.

Alternatives

The Vivid Giya G2 Cu is the 4-way, 5-driver model below, in a 1383 mm cabinet with two 175 mm bass drivers.

Spezifikationen

  • Modellbezeichnung

    Giya G1S Cu

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten